Need to program rca univ remote for sanyo tv & i lost the manual

How To Program A Philips Universal Remote ' Codes For ...

codesforuniversalremotes.com/program-philips-universal-remote/

Here is how to Program any Philips Universal Remote Control. Turn on the device you ... Remote Control Codes December 21, 2015 at 1:19 pm. Stephanie,

Codes For Universal Remotes ' Universal Remote Control ...

codesforuniversalremotes.com/

Universal Remote Control Codes For TV & Audio. ... Codes for Philips Universal Remotes · Sanyo TV Codes for Universal Remotes · Codes for .... I have an 19 inch Emerson flat screen and a RCA universal remote. Please help with the code ..

Most likely because very few if any universal remotes will work for Sanyo-----Try to google the model of the remote to locate instructions for programming it.

Try after amke a factory reset to your tV. Normally, aits remote control is needed to make it channel-4.

Use the SKU number of the RCA remote to look for the code here. Click on "Find your Remote Codes Here" at the left side of the screen.

Do you have a Sanyo Universal Remote ? If not, you program your dish 500 remote for these.

You didn't supply enough information about the URC-20D1F or the Sanyo device. I am assuming the URC is an RCA branded device - but I can't seem to locate that model number. I don't know what an "LTD Sanyo" is - TV, VCR., ??

Regardless - RCA is also known as Thompson Consumer Electronics. They have additional information for RCA, GE and Proscan branded remote control units. Have a look at the link below - there are some Sanyo codes that may work for your device.

http://www.thompsontv.com/rcarc.html

Good luck!

Sorry it took so long to respond to your request for assistance. You can find the instructions and codes you need to program your television at the RCA customer support website [http://www.rcaaccessories.com/rcaaccessories/ ] Copy this web address and paste it into the address bar of your web browser. This will take you to the RCA main customer support page. Just go to the universal remote control section and find your model remote control. Use the model number to find the technical support information page. On this page will be a copy of the owners manual and the remote control codes to use with your products. I hope this information helps you with your problem of needing instructions and codes to use your remote with your products. Thank you for using FixYa and have a nice day!

how program my control sanyo for tv curtis mathes

Hi,

Download the user manual from here:
http://www.retrevo.com/s/RCA-RCR311B-Universal-Remotes-review-manual/id/402ci569/t/1-2/

Click on the PDF download in the product summary.

Cheers

The codes listed by Sanyo for my TV won't work in my star Choice remote.
I tried 017 021 039 056 057 058 and 140 as listed by Sanyo.
Any ideas?