Camera Screen Goes Blank

It is purely a technical issue and you cannot solve it, the possibility are listed below
1. Software crash 2. Mobile phone drop
Service your mobile
Kindly rate my help ++ Thank you

E-mail your question to Kodak at: http://www.kodak.com/global/en/service/contactKodak/email/consumerDigital_contact.jhtml?pq-path=13452

hi try to reset ur camera...To do such reset, turn on the camera and hold the menu button down for longer than 5 seconds. A message should hopefully come up on your LCD asking if you want to reset the camera. Select Yes...

thank u!!!

same problem unable to take pictures or anything

Try to manually make it so that it is set to outdoor settings. Or maybe try low brightness and no flash.

This sounds like it might be a defective CCD imager. If so, Fuji should fix this for you for free. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/12/fuji-digital-cameras-showing-black.html

http://www.fujifilmusa.com/JSP/fuji/epartners/ServiceSupportProductContent.jsp?dbid=839010&prodcat=2147483647&sscucatid=664262&quicklink=true

Applicable cameras include:
F303, F410, and F700

You need new batteries. :)

tap or hit the cybershot logo. It fixed my white screen. I didnt think it would work but sure enough. My camera is working like new.

I hope you sent it back to Fuji before your guarantee ran out.

You've probably corrupted the firmware download. If the camera is still recognized by your PC then I'd try downloading the firmware again and try to load it again into the camera. I don't wish to upset you but corrupting the firmware can in some instances make the camera unusable. Your manual should tell you if there's a reset and how to do it. Don't forget the camera's firmware can also be upgraded by loading the update onto the memory card and running it from there. GOOD LUCK BMW