How do i program my icom IC-F3GS what program do i ned

Icom IC-41PRO User Programming Software

Radiotronics Pty Ltd https://www.radiotronics.com.au > ... > Software

Icom CS-41PRO is the genuine and official programming software for the Icom IC-41PRO UHF CB two-way radio. Compatible with Windows 10, 8.1, 7, Vista and XP.
Free · ‎In stock

• 
  

  Protected: Icom IC-41PRO Dealer Programming Software

  https://www.radiotronics.com.au > products > icom-ic-...
  Icom CS-41PRO is the genuine and official Icom IC-41PRO programming software for use by dealers (not customers).

ICOM CS-41PRO v1.02 Dealer Programming/Alignment ...

Radio Cables https://radiocables.com.au > cs41pro-software

ICOM Dealer Programming, (includes Alignment built-in) Software CS-410PRO Revision 1.02 - Instantly available for Download! Locating service & storage fee, ...
A$24.99

Icom CS-41Pro CPS (R1.02) Programming Software

HamFiles https://hamfiles.co.uk > icom-cs41-pro

Jun 25, 2017 - Programming software for: IC-41Pro. Includes: Installation & Connection Instructions. 35rem Notes: TX (Editing is restricted) ...

ICOM CS-41Pro Rev. 1.02 PROGRAMMING &amp

eBay https://www.ebay.com > itm

The CS-41 Pro (Dealer) is designed for clone and programming the ICOM IC-41 Pro. ICOM CS-41Pro (dealer) Rev 1.02. Clone and Programming Software.
US$24.49

Icom Programming Software Guide

Quality Two-Way Radios https://quality2wayradios.com > store > icom-program...
Icom Programming Software Guide. The guide below outlines by Radio M

CS-F3011 Icom Software for IC-F3011 & F4011 - Download

https://quality2wayradios.com > store > icom-cs-f3011-...
Icom Programming Software for IC-F3011 & F4011 ... This item is for download only. We no longer ship CD's. This cloning software is designed to perform data entry ...

IC-F3011/F3013/F4011/F4013 Instruction Manual - Icom ...

https://www.icomamerica.com > downloads > Do...
PDF
manual contains important operating instructions for the IC-F3011/. IC-F3013 vhf transceivers ... ceived, according to the pre-programming. (For IC-F3013/.

Even saying ICOM would help people to help you. That radio requires software and a programming cable adapter. It is new enough to do Narrow band. Best bet is to find an ICOM dealer to program it for you. That way, it will be on legal frequencies. Your unit is VHF, so it cannot talk to GMRS over the counter radios. It is a decent radio, we sold them and the battery life was good. Ask more if you want to know more.

Try looking up the user manual at www.mods.dk they have many manuals. Otherwise you may be able to get the manual from www.icom.com.

Download the manual from here:
http://www.icomamerica.com/en/downloads/default.aspx?Category=142

I use the ICOM OPC-478 cable along with the ICOM F3GS software. In order to use the OPC-478 cable with WINDOWS 7, it will be necessary to go to the site

www.icomamerica.com

choose support (not option 1) and look for the updated driver package for WINDOWS 7. When that has been downloaded and installed, it will be necessary to go into that part of the control device manager and change the port to "COM2".

I am now able to program both my IC-F3GS and the IC-F4GS.

Try contacting ICOM AMERICA

www.icomamerica.com or look on eBay.

.

Using the ICOM F3GS program, go to COMMON 1 and set the INACTIVE TIMER to something other than what it currently is.

Might work...

I use the ICOM OPC-478 cable along with the ICOM F3GS software. In order to use the OPC-478 cable with WINDOWS 7, it will be necessary to go to the site

www.icomamerica.com

choose support (not option 1) and look for the updated driver package for WINDOWS 7. When that has been downloaded and installed, it will be necessary to go into that part of the control device manager and change the port to "COM2".

I am now able to program both my IC-F3GS and the IC-F4GS.

firstly you will need to access the menu if you cannot these may be programmed using the proper software ,you will be able to unlock it then or give it to someone that can program it for you

cqham.ru