I can't access dsm reset through fishfinder menu, it keeps saying no data source and I can't scroll down!

1. Tap the Settings icon from your home screen or app drawer.
2. Swipe up to scroll down to the bottom of the page.
3. Tap the General management tab.
4. Hit Reset.
5. Hit Factory data reset.
6. Scroll down to the bottom of the page.
7. Hit the blue Reset button.
8. Enter your device PIN and tap Next.
9. Tap Delete all.

Your phone will reboot and you'll have to go through the setup process again before you're able to restore your data.

And also there is another method you can use:

__Factory reset via recovery mode__

1. If your phone is on, power it off.
2. Hold down the Power and Volume down buttons. Instead of booting up normally, you'll see "Start" in an arrow pointed at the power button. Here you use the Volume buttons to scroll and the Power button to select an option.
3. Press the Volume down button until you've highlighted Recovery mode.
4. Press the Power Button to start recovery mode.
5. When your phone reloads, you should see a screen that says "No command" with an Android robot in distress. Press and hold the power and volume up buttons together to load the recovery mode.
6. Using the Volume buttons to scroll through the menu, highlight Wipe data/factory reset.
7. Press the Power button to select.
8. Highlight and select Yes to confirm the reset.
9. Once the reset is complete, you will be bounced back to the same recovery mode menu. Press the Power button to select Reboot system now.

Your phone will power on and be reset to its factory settings. Your phone will reboot and you'll have to go through the setup process again before you're able to restore your data

Switch of your phone.press power button nd menu button at the same time the information you will display on your screen and select what you want to do

Hi John,

Try this...

Go to Settings menu->Scroll to Applications->Manage applications->Open All tab->Scroll down an find Google Play store->Click Open play store->Clear data, clear cache and uninstall updates.

You will loose all store data doing this but you will get access to using the phone again. From the LG website:

1. Power down the phone then remove/reinsert the battery to ensure that the device is completely off
2. Press and hold the following keys for 10 seconds: Volume Down + Home Button + Power Button. Release all 3 keys when the Android Recovery Menu pops up
3. Press Volume Down to scroll down and highlight "wipe data/factory reset"
4. Press the Menu Button to select
5. Press Volume Down to scroll down and highlight "Yes - Delete All User Data".
6. Press the Menu Button to select
7. After data wipe is complete simply highlight "reboot system now" and select it by pressing the Menu Button.

from home scree press the menu kee and then tap settings. scroll and tap Privacy. tap factory data reset. tap reset phone. if security is enabled enter your unlock pin password or pattern. tap erase everything.
Alternative method.
1.power phone off
2.press and hold HOME, Volume down and power keys until an exclamation point is displayed next to an android on screen.
3. Press the Home key to view the Android system recovery options
4. press the volume down to scroll to Wipe data/factory reset. and then press the menu key to select.
5. press volume down to scroll to yes -- delete all user data and then press the menu key to select.
6. when data wipe complete is displayed select reboot system now.

Factory reset via hardware on Pantech Pocket P9060: power, volume down and home buttons all at same time > scroll to wipe data/factory reset > press menu button > scroll to erase all data > press menu button > scroll to reboot now > press menu button

To reset your phone,Please follow this procedure

1. Open the Application tray
2. Touch settings
3. Scroll down and touch policy
4. Scroll down and touch Factory Data reset
5. Touch Reset phone

If you can not access the menu,Here's the Hard Reset method

1. Power of your mobile
2. On the hardware keyboard,Hold the "X" key and the "Power" button.
3. When Moto symbols comes out,you may now release the "Power on" key but keep holding the X key until you see a triangle and an exclamation point.
4. Now press the "Fn" key and "T" key at the same time.
5.You will now see a menu on screen
6. use keyboard cursor key to move the blue highlighted selections
7. To proceed, select "Wipe data/Factory reset
8. press the return key to select the option that is highlighted.
9. Use the cursor key to highlight YES from the next menu.
10. Press the return key to complete the selection.
11. reset is on progress then wait until it's DONE.
12. After the process,you will see a message "Reboot System Now",select it using the cursor.
13. Press the return key to reboot the device.


Thank you for visiting Fixya...

I don't have the sounder so can't address your question directly, but you can download all Raymarine manuals for your gear directly at www.raymarine.com

You have either the DSM250 or DSM300 digital depth sounder module installed. The C80 is not seeing it.

There is an LED status light on the DSM. For starters, it should be lit either red, yellow or green to confirm it is actually powered on. We are hoping for a green light.

Double-check the cable between DSM and C80 for tightness. Also double-check the DSM's power cable for tightness.

The DSM's are sensitive to voltage level onboard. Make sure the DSM's connections to the circuit breaker panel or battery are tight and clean. Double check with a multimeter the there is 12V DC available to the DSM.

Let me know what you find.