937.71 Service Transport Motor

probably some paper stuck behind the tray

Hello,

Please click support lexmark com to download the drivers.

Hello,

The 923.01 error indicated an over temperature state in the fuser assembly caused by a failure in a part called a thermister. You will need to replace the fuser to clear the error. This is a user replaceable part, you only need a Phillips screwdriver to replace the fuser assembly. The part number you need is 39V2600 and they are available from places like amazon.com or Buy.com

I hope this helps, if so please rate my solution.

BuddyMc

hmf..insturctions or send it back and get another one have the ricept (sorry im italian) sned it back

Try this: sign out of Yahoo.
Then delete your temporary Internet files, history and cookies, some computers need to reboot. Once done, go back into Yahoo and see if that has helped. If you continue to have trouble, contact service representative and explain the problem to them.

Yahoo! Mail Technical Help Form
http://help.yahoo.com/l/us/yahoo/mail/ya…

Yahoo! Customer Service
1-408-349-1572 1-408-349-1572

take the toner out and shake it or try to replace it with a new one

If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

This should do it

The following link will take you to the driver you need : http://www.ibm.com/products/finder/us/finders?Ne=5000000&finderN=1000188&pg=ddfinder&collectionN=0&sid=321969211230016118096&cm_re=other-_-suprcn-_-download&cc=us&lc=en&oldC1=5001220&tmpl=%2Fproducts%2Ffinder%2Fus%2Fen%2Ffinders&C1=5001220&C2=5001257&ibm-go.x=18&ibm-go.y=12 Merry Xmas!

IBM wesite under the support section should have drivers available for sownload. Hope this helps.

You need to enter the config menu, by turning off the printer. Hold the middle button and right arrow and power the printer up. Continue to hold the two buttons until you see Performing self test. Then you should see config menu. Scroll to Reset Maintenance count and select it. When it returns to the previous menu, you can restart the printer and the error should be cleared.