SOURCE: red light is always on
Power supply problem, Loewe issued a PSKIT for these items. part number 90415.900. If none of the secondary fuses are gone kit required (All parts should be fitted)
SOURCE: Loewe Aconda 9381 HD/DR+ Will not switch
Could be loss of voltage on secondary or problem on Power supply. Check 4/5 (depnding on chassis) wickman fuses on secondary if none are o/c then replace power supply components with Kit from Loewe. Part number 90415.900.
Should take tv engineer about 1 hour (max) to replace parts form kit.
SOURCE: red light is always on
Flyback transformer or its circuit around may be fault.
It is better to call an authorized service if the appliance's warranty has expired.
SOURCE: Have Loewe Concept 84-100. Push power switch and
I've read on your site where a number of others have had this problem and on the strength of that have talked to a local technician who has more or less agreed - so will go with his expertise. Many thanks for your interest.
Hello,
My LOEWE CAL 232 will not power up. When the power button is pressed, the monitor turns on, with the LOEWE on the monitor, then the TV continues with the previous activity (antenna, DVD, VCR etc.). Now all that happens is
1. the red light comes on
2.after about 1 second the green light turns on for about 12 seconds
3. the the green light turns off for about 1 second
4. then the green light turns on again for about 12 seconds
and this continues until the power button is pressed to turn the TV off. During this time, the monitor does not turn on and the only sound I hear seems to eminate from the power button.
Any thoughts?
156 views
Usually answered in minutes!
×