SOURCE: When using the zoom button the cam stops working
This suggests the zoom motor has failed. As you only purchased it 2 weeks ago - it should be replaced under warranty
SOURCE: my lcd screen is black
sounds like a CCD problem, You could have the camera serviced h ow long ago did you purchase the camera?
Thanks,
Lee
SOURCE: The lcd of my Panasonic Lumix DMC-FX01 became grey
pls try to reset the camera to factory settings
performa a software reset via the menu's using the settings on the 'play' setting on the dial
if it doesnt help then
u can buy screen here and get it fixed or u can fix it is a jack mechanism inside the camera no soldering work it is not that much technical inside these devices all things are with jacks and flex cables and grips so u can do it see the link below for replacement screen from ebay and u go repair it if u go to a repair shop or panasonic they will charge u 200 $ for a 200 $ camera so dont attempt it PLS RATE ME FIXYA for help and one thing more u can check the flex cable and the connector of lcd to board may be it has some condesation and re seating might help bcoz ur LCD is not damaged as u told me no impact not broken so it might be a faulty flex cable
http://cgi.ebay.com/PANASONIC-LUMIX-DMC-FX01-FX1-LCD-DISPLAY-REPLACEMENT_W0QQitemZ220371657188QQcmdZViewItemQQimsxZ20090304?IMSfp=TL090304123003r38786
pls dont forget to rate me FIXYA
30 views
Usually answered in minutes!
×