After a short not-use period I lose the WiFi connection to the printer. It will not print, ping gives no-reply. Printer shows (in display) connection fine.
The disconnect-problem was caused by the settings of the WiFi-router.
The settings are:
Capture(wlanadv.beacon)
Beacon Interval:
(
Capture(hwlad2.def)
Default: 100,
Capture(hwlad2.milli)
Milliseconds,
Capture(hwlad2.range)
Range: 1 - 65535)
Capture(wlanadv.dtim)
DTIM Interval:
(
Capture(hwlad2.def)
Default: 1,
Capture(hwlad2.range)
Range: 1 - 255)
Capture(hwlad2.frathrh)
Fragmentation Threshold:
(
Capture(hwlad2.def)
Default: 2346,
Capture(hwlad2.range)
Range: 256 - 2346)
Capture(wlanadv.rts)
RTS Threshold:
(
Capture(hwlad2.def)
Default: 2347,
Capture(hwlad2.range)
Range: 0 - 2347)
This gives an optimal performance of the router, The default setting work fine for the printer, but gives less performance.
I now use a seperate wifi-router for the printer.
All is fine now.
529 views
Usually answered in minutes!
×