Not responding to any codes thew automatic codes on ge universal remote

Hey there are many reasons when your TV is working and screen flashes or blink!

Here are solutions try them:

https://myuniversalremotecodes.com/magnavox-tv-remote-codes/ https://myuniversalremotecodes.com/onn-universal-remote-codes/
https://myuniversalremotecodes.com/remote-control-codes-for-samsung-tv/
https://myuniversalremotecodes.com/ge-universal-remote-codes/ https://myuniversalremotecodes.com/key-fob-programming/

1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.
3. Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press AUX then the device Button you are assigning to AUX. The INDICATOR LIGHT will blink then remain lit.
4. Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will turn off.
5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the POWER button. Your device should turn off.
Note: If your device does not respond to the first code listed, If your TV, VCR, DVD, etc. does not respond after you have tried all the codes for your brand or if your brand is not listed, try searching for your codes by following the steps below. Codes for brands are located at the bottom of this link. http://www.directutor.com/content/ge-universal-remote-instructions
GE Universal Remote Codes and Instructions direcTutor

GE Universal Remote Codes ' Jasco

https://jascoproducts.com/support/ge-universal-remote-codes

A version 2 through version 4 remote will have a "V2" to "V4" after the model number. ... Program your GE Universal Remote using the correct code list and ...

GE Universal Remote Codes and Instructions ' direcTutor

www.directutor.com/content/ge-universal-remote-instructions

Direct Code Entry for GE remotes with 4 digit codes. 1. ... Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press ...

How to Program a Universal Remote - Frontier

internet.frontier.com/resources/how-to/program-a-universal-remote/

Here's how to program universal remotes from RCA and GE: ... with whatever device you're currently attempting to program (i.e. the TV, the DVD player, etc.) ... If you havea V2, V3 or V4 remote and are programming a DVD player, press PLAY ...

How To Program A GE Universal Remote ' Codes For ...

codesforuniversalremotes.com/program-ge-universal-remote/

just point at tv press tv button then power on off till it responds u have to turn the tv on man. first i have the codes but not the time to load all

This remote uses a 4-digit code.Try one of the following codes: 0062 0004 0009 0135 0189 0183 1141 0227 0456 0008 0068 0075 0141 0161 . There is also a manual code search available.

With the TV on, press and hold Setup until the LED lights up, then release Setup. Press the TV button once (the LED will blink). Then press the On-Off button until the TV responds (up to 300 times). Then press Enter to store the code.

However universal remotes codes are limited to those for devices released at least 6 months before the remote was programmed. If your TV is newer, you may need a newer universal remote.

The manual is available here: http://www.jascoproducts.com/support/manual-downloads/applications/DocumentLibraryManager/upload/24914-Manual-Eng-Spa.pdf . The code lists are here: http://www.jascoproducts.com/support/universal-remote-codes.asp .

I hope this helps.

Cindy Wells

Here you go. This will work with most all universal remote controls. If you don't have the code do the following:
Automatic Programming
With automatic programming, the remote control tests all the codes available on the Code List and assigns the correct code for the selected device. Although this method can be more time-consuming, it eliminates the need to look up codes and enter them manually.

1. Turn off the device with which you want to use the remote control.

2. Press and hold the corresponding button on the remote control
(TV, VCR, SAT, DVD, CAB or AUD) until POWER INDICATOR illuminates. It should take a couple of seconds for the light to remain solid. The remote control is in programming mode.

3. Press and release power button. The POWER INDICATOR flashes once and stays on indicating the unit is in Power Scan mode.

4. Press CHANNEL up or CHANNEL down repeatedly until the device turns on.

5. When the device turns on, press OK to store the code.

Note:
• To exit without storing the code, press BACK.
• T he unit will search for the next code or the previous code if you press
CHANNEL up or CHANNEL down after the device turns on. (go slow you need to press OK when the TV turns on) if you mess up turn TV off and start over.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.

Fill free to ask me questions about anything..........................

try to program it by using automatic search process. press and hold set up botton till the light stands on ,press the device to pprogram then press power simultaneously .When your device responds press enter botton to strore the code.

need codes for remote to work a 27" samsung tv

HERE IS THE PDF LINK FOR THE ORIGINAL FOUR DIGIT CODES INCLUDED IN THE PACKAGE AT THE TIME OF PURCHASE.

http://www.jascoproducts.com/support/download-files/RemoteCode-4-digit.pdf