Question about Dewalt DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

3 Answers

Dewalt battery charger won't charge

DW9107 unit has a blinking red light when you try to insert the battery for charging. Yesterday, it was solid red for several hours when this is a one hour charger. Any advice?

I see on the internet that the unit was recalled in 2000 with certain date stamps. Where would I find that? is it actually stamped into the bottom of the plastic followed by the initials DB?

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 30 Answers

As you know, solid red on your charger means that the battery is fully charged and the BLINKING red light means the battery is charging. Unless the light is blinking irradically everything is working the way it is supposed to. If the light is blinking irradically, the battery may just be too hot or too cold to charge ( like when you are driving many lags and your battery dies) and in this case simply wait 15 minutes to charge. If you get a fast blinking light still, the problem probably is with the battery.

Posted on Dec 12, 2009

  • harold souza Jul 04, 2012

    the to hot or cold coment is wrong , its just bad

  • Anthony Snow
    Anthony Snow Sep 01, 2012

    Add a CommentBad? So you are saying that a hot/cold delay indication and a replace battery indication are both bad batteries? If that is the case then why have the hot/cold indication at all?

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

My Battery charger DW 9107 has 50 VDC output is correct this voltage?? thanks in advance my friends.

Posted on Mar 13, 2016

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 49 Answers

You must have put in a battery pack that was already charged, the second time you went to use your charger, I'm guessing that you are not real familiar De Walt power tools and when you saw the solid red light maybe you thought it was broken?
On the front of your charger right above "De Walt" there a "scale" that tells you the 5 different red light indicators.
If you took that Batt pack out of charger and put it back in your cordless and used it for 2 minutes and put it back in charger the"red indicator light" would start to blink.... PLEASE READ. You can really damage or shorten the life of any battery pack by charging it when there is ANY charge even a small charge left in the pack- so you want to only charge battery pack when the drill wil not move inside the battery pack are like 18 0r 20 rechargeable batteries if any cell inside the battery has a charge it you will damage it and it wont hold a full charge every again...

Perry Tradesman-..

Posted on Oct 21, 2014

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Charger light blinks rapidly for dewalt charger?


usually indicates battery has failed slow blink charging steady red fully charged

Nov 03, 2017 | Dewalt Drills

1 Answer

What can cause this issue


if the battery is older than 1 year replace the battery with a new one , also I know its difficult but try to not charge a battery till its dead , short cycle charging of battery's kills em fast if battery is less than 1yr contact Milwaukee its still under warranty

May 27, 2016 | Dewalt Drills

1 Answer

When I put the battery on the charger the light on the charger stays on for little awhile the it starts to blink, but when I try to use the battery it is not charged. So I am not sure if I need a new


Hi there! It sounds like you have our Linx stick vacuum or hand vacuum model. Plug only the charger into an outlet, the blue light on the charger should flash once. If the light on the charger flashes once then the charger is fine. Try resetting the battery by following these quick steps below.

1. Remove the battery from charger or cleaner
2. Unplug the charger
3. Insert the battery into the vacuum and turn the unit on for 30 seconds (even if it has no power)
4. Remove the battery
5. Plug the charger into an outlet, make sure the light on charger blinks blue once.
6. Insert battery into charger

The light should be a solid blue, indicating the battery reset worked. If so, allow the battery to charge for 3-4 hours, completely deplete battery on your next use and re-charge. If the light on the charger is still blinking, your battery will need to be replaced. I have included a link where you may go to purchase a replacement battery if needed. Hope this helps!

Search Results

Sep 21, 2014 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

What does a orange power light mean


please see the commentary. God bless you

  • The majority of laptops will display a solid green, blue or purple battery light to indicate that the battery is fully charged. Most manufacturers indicate that a laptop is in the process of charging by displaying a solid or blinking green, orange, blue or purple light. If your battery indicator light is green, blue or purple, the battery is probably functional, regardless of whether the light is blinking. If the light is solid orange, the laptop is probably in the process of charging.

Battery Error Coneventions

  • Many battery manufacturers use rapidly blinking lights to indicate that a battery's charge level is low. In general, a laptop will rapidly blink orange or red when its charge drops below a certain level until the computer is plugged into a power outlet and charged. If your laptop's battery indicator continues to blink rapidly in orange or red or if it remains red even when it is plugged into the charger, it indicates a problem with your battery or the charger.


Read more: http://www.ehow.com/info_12183593_blinking-battery-light-laptop-mean-charger-not-charging.html#ixzz2fu5qhEWg

Sep 25, 2013 | Computers & Internet

1 Answer

Brand new, never used. Plug into wall to charge and just get flashing red light. After 16 hrs on charge, still flashing red and when turn on, screen blinks then shuts down.


check that you have the battery in the correct way
if it has batteries like AA , AAA or what ever the negative terminal of the battery goes against the coil spring so if you have them all facing the same way, that may be why they are not charging
the screen shutting down at this stage would be cause the batteries are flat
of course you could always bet new fully charged rechargeable batteries and put them in correctly to see if the rest works

Apr 30, 2017 | Sylvania SDVD7015 7 in Portable DVD Player

1 Answer

I purchased a new charger for my Dewalt Cordless drill and the red light just blinks. Is this normal


They usually have a little pic on there that tells you what the blinking means. I think it is charging, but sometimes it needs a green light too. Check it out. Mine flashes all kinds of signals, when it hits a dead battery, one that won't charge, it flashes something else. It only takes an hour to charge. Is the battery getting charged at all? Hope this helps.

Apr 25, 2010 | Dewalt Drills

1 Answer

When charging battery flashes red then stays on red.how long should it take to change to green?.its a dewault9130 18 volt


it doesn't change to green, the solid red light means it is fully charged, there should be a legend on the front of the charger to help you with this. If it flashes real fast the battery is malfunctioning and slow flashing is charging and again solid is fully charger.

Oct 03, 2009 | Dewalt 7.2-18.0 Volt One Hour Charger

1 Answer

The batterie charger for my Casio Exilim EX-Z77 has a blinking red light instead of a continous red light when i try charging the batterie. also, it doesnt appear to be charging it at all. Left in in for...


The blinking light indicates a charging error. Try connecting a 9 volt battery to your camera battery. Sometimes if the battery has lost all charge, the charger doesn't recognize it properly.

Dec 05, 2008 | Cameras

Not finding what you are looking for?
Dewalt DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only Logo

9,918 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Drills Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Lance Guthrie
Lance Guthrie

Level 1 Expert

18 Answers

Spud Howell

Level 2 Expert

66 Answers

Are you a Dewalt Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...