My dryer had a small melt down. My new wife brought a dryer into the relationship. And now I get to fix it. Apparently the previous owner did not tighten the left terminal tight enough on the main power cord and it melted down. I have a new terminal block but I took it a apart awhile ago and am just now getting around to fixing it. The problem is I don't remember where the different wires on the dryer go. There is a yellow and white wire coming from the controls. There are two blue wires coming from the motor area. ( they were both melted off.) I am pretty sure the white goes to the nuetral and at least one of the blue wire goes to the one side of the hot. I am not sure where the yellow wire goes or the other blue wire. Any help would be greatly appreciated.
383 views
Usually answered in minutes!
×