Today my 50 inch plasma TV went switched off itself ,i tried to switch back it will not start I bought this TV one year ago ,and red light is blinking could you please suggest what could have caused it and a possible solution.
Thank you
It could have over heated you can try to reset it first unplug it for about five minutes and try to turn it on if that dont work the remote might have a set button try holding that down until the red light flashes twice, then turn it on if not then hold the power button down on the set for a good five seconds to see if that resets it. if none of that works you will have to go to panasonic .com for the reset instructions.with the red light blinking the power supply is most likely good you just need to reset i.
My volume went out on my 50 inch sanyo plasma tv have to play it from surround sound
I have the same problem with my PLASMA TV, 50 philips tv and they say its is the position of my attenna and that the tv channels sent a signal out to the tv to shut it of this one of the lame excuse what i every hear before so they think it is normal that a tv shut off by it self i have a warrenty dont ever by a warrenty at walmart they ****
3,030 views
Usually answered in minutes!
thanks a lot for your response...i have noticed that the tv flashes red light 10 times and then repeats...i tried to unplug and reset but still nothing comes on please help me to solve this problem
thanks
My 50 in Panasonic Plasma does the same thing as your 42 in version. Looks like the power circuitry - see the attached link for a description of the same problem.
I've only had my TV for 5 days: hope Best Buy will honor an exchange!?
http://stafford.typepad.com/the_next_ame...
[email protected]
my 50"panasonic/plasma TV did the same but flashes 11 times!
my plasma tc p50s60 has a blinking red light on the front. it blinks in 3's. any solutions?
×