Using multiple printers on switch box. Z4M Plus and Z6M. Sometimes data is missing or printed incorrectly. Font size changes or certain text is missing. We are using Label Vision Version 4.3. It is like we can make thousands that are good and then one changes. It is like the data goes missing or something.

There is a printhead hot error that will come up on the printer if it overheats the printing mech and it will pause. If it totally locks up I'd suspect the main logic.

Z4M ZEBRA 77904M PWB MAIN LOGIC Z4M Refurbished
Z4M Plus ZEBRA 34901 010M PWB MAIN LOGIC Z4M Z6M Refurbished

Please get the correct driver here : www.printcountry.com/drivers.asp
www.opendrivers.com/.../printers-free-driver-download.html
www.driversdown.com/driverslist/r_4_1.shtml
Regards, Jay__98fr

This is I think due to the data being sent to your printer. On a Z4m the width is 4 inch and whatever is beyond is not printed. On your Z6M the coordinates are valid so your printer will print the code.

Check the label size is set correctly in the application. Try using a driver from Nice Label or Seagull Scientific websites to suit Z4M (Not Z4M Plus). Recalibrate the printer and try again. Remember to setup the driver correctly because the driver will override the printer settings.

Hello,

Have you tried sending print jobs thru the parallel port only? I think it has to deal with your jetdirect box. You can try reseting that as well.

Rory Cardenas
Midrange Repair and Parts
Alsip IL 60803
708-597-4222 x240
[email protected]
AOL IM: RORYMRP

Go to your printer,right click on printer and go to Preferences, make sure you are using Letter size of 8.50x11.00. Under your paper quality print documents on 8.50x11.00 (scale to fit).

On IE go to view click Text size and select from smallest to largest text.
To change the Font size in IE go to control panel, open the display-open the appearance tab and change the font size.

Might foul the ribbon sensor, clean the sensor and try to print again.

Two things you can try!

1.From your Browser you can change text size in the browser.
I am using Internet Explorer for this example
Click on View from the top tool bar, Select Text Size.. you can increase and decrease the text size of a web page.

2.Before you print check Print Preview and Increse the page size.
My Browser defualt to Shrink to Fit,
I can change that to 120% and it will print the page very large.

Most programs in Windows will offer a Print Preivew
there you can make adjustments, and this can also be accomplished with Page Set Up..

Hope this Helps

try to reset the printer to factory default.
on setings, without the printer cable plug in. and try again.

this is a color printer or not