Afico MP c2550 scanner error 36851 no respnse from scanner is the only message

http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/68648-mp-c2550-sc-565-a.html


http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/68648-mp-c2550-sc-565-a.html

my dear you change development unit

Check for:
-broken plastic gear on right side of copier
-paper or foreign object in paper path
-paper or foreign object near fuser

Any Ricoh dealer, big $$$

Bad toner pump

it needs to install the drivers of the scanner

Hello!
Changing the Drum does not affect the scanner settings.
You can print because your PC (computer) can see your machine but for scanner is the oposit. The machine must see your PC.
I think that in this machine you have an SD card with the scanner funtion. Try to take it off and then put it on again. (the SD card is on its side. In the controller box)

If you still have any doubt reply to me.

Dear kishorkamble,

We fixed this error, which happened in another model (Aficio MP-5500), by configuring two options:
1. Activating SNMP protocol. Menu Configuration -> Network -> IPv4
2. Activating RSH/RCP protocol. Menu Configuration -> Network -> SNMP

I hope it may be useful.

Yours sincerely,

Bruno Coutinho

in the hospital

remove all paper from the trays then turn machine off wait a few second then turn back on should reset then reload paper