Connecting old DVD player to LCD

Use three RCA cables, yellow, white and red to connect DVD player to TV as shown in the diagram below. Connect yellow to yellow and white to white. Connect red to red. Select on the TV, the A/V input where the DVD is connected using the TV remote control. Power on TV and DVD, place a disc in tray of DVD player and press PLAY.

The cable u are using it is the S-video cable?Yes,this cable dosen't support audio.Must used a RCA component cable like R,W cable connected between the tv and the DVD player to get sound.

Hi,

• If I understand your question correctly you want to watch your DVD on your TV thru your receiver,
  
• you need to connect either composite connections "Audio/Video Output " red/white/yellow RCA jacks or "Optic cable output" of your receiver
• ( pls note that component to composite conversion is not possible on receiver ..use one type connection thru all the way )
  

• to "Audio/Video input " red/white/yellow RCA jacks or "Optic Cable input" of your TV

• than just switch to DVD mode on corresponding your RCA or Optic connection...

There you go..Your DVD sound and video both are on the TV..

• Hope this helps!

Take care and please Remember to rate/vote and give me 4 Thumbs Up for me to continue for Helping out the Community :)

you can connect two diffent ways with your bravia lcd tv one is videu out connection from dvd &put the cable in to video in to tv other way is rgb connection there is three color sockets in your dvd player & same as your lcd tv so connect with color wise & switch tv to component

hey I think you need to use component cables blue green red from the player to the tv, make sure the blue green red ports are also on the tv, note: red yellow white composite cable will not interchange with blue green red component cable or connection.

simplify- blue green red= component
red white yellow=composite

*wires must match colors on both tv and player inputs.

then set your input on your tv to where you conected the cable.

What type of Inputs do you have on your TV. (ANT IN, S-Videio, RCA Video,RCA Audio)

If you only have a ANT In or RF Coaxial hook up you will need a RF Modulator

Try to set your video output settings on your dvd player . I assume you used to connect to your old tv by using svideo and now you are using another connection like component, scart or hdmi.If the video output setttings on your dvd are still on svideo you will have to set it to rgb or component or else you will get black and white images..

The DVD player may have multiple output formats that can be displayed. Sounds like you have the composite output selected when you have the component output selected on the DVD player. Check the menu options on the DVD player and confirm they match the way you have the player connected

You will need to connect the dvd via one of the inputs on the tv then select that input on the tv to see the dvd. Since dvd can connect to the tv several ways I suggest you read the owners manual as they show all the hookups to the tv. If your dvd has an hdmi input that's the best output to use from the dvd player.