Hi, guys My Denon 3910 is killing me softly...
It all began with cds: taking longer to load, not starting at the beggining or failing to load and displaying all zeros...DVDs began to have extended load times, too. Progressed to: 1) vibrating while trying to load some new DVDs, failing and displaying either "stop" or all zeros. I finally tried a "Fellowes DVD Lens Cleaner " but it would only play the disc's main page and then completely stop, offering "disc error". This did help to allow for the playing of discs that previously would not, but not for long! I live in New York and seek a good repair shop and /or advice.
thanks, Mike.
I have the Denon 2900 (about 4 years of use) and until recently, suffered from the same (growing) problem. CD's were very difficult to start/read. I recently found advice which I tried and was succesful with. It was manually cleaning the laserlens. I took away the outer housing by unscrewing all off the on top (6), side (4) and the back (2) bolts. After that I took out the top plate of the laserunit which took two very little screws taking out. Now you are looking at the cd-tray with the lens. Take a very soft and clean cloth and moisten it a little bit with clean water (be very carefull with the moistening, don't allow any waterdrop to come out of the cloth into the laserlens while cleaning! Carefully clean the lens and dry it with a dry part of the same cloth. Replace the top plate and the outer housing and the player will recognize the discs like it's new again. Good luck! Robert Jan, The Hague the Netherlands
1,582 views
Usually answered in minutes!
I dont play many cd's, however I have increasing amount of DVD's that will not play - they seem to load and then all zeros display and will not play. I have also recently had the same problems with SACD. I will first move to try cleaning as posted as a solution
×