Living soluttion codes for my westinghouse tv

New and old model remote controls for sale on Amazon and other places on the internet. Might also be available in local retail stores wherever you may live.

https://www.amazon.com/Westinghouse-SK-26H590D-SK-26H730S-SK-42F430S-Sold-Parts-outlet/dp/B00MCHEJ56


Amazon com New Westinghouse RMT 05 RMT 05 Remote for SK 26H590D SK 26H730S...

Westinghouse TV SK-32H240S http://legacywd.com/pdf/111_User_Manual.pdf

For Westinghouse TVs, try the codes: 11712, 10451, 10885, 10889, 11300, 11577. Since the TV was announced in 2006 and the remote code list has a copyright of 2010, the remote should control the TV. However, I can't tell which of the 6 codes will work for your TV.

The manual and code list for the RCRN04GR are available from http://www.rcaaudiovideo.com/remotes/4-5-devices/?sku=RCRN04GR . Click on the Support/Manuals tab.

I hope this helps.

Cindy Wells

Hello

WHITE WESTINGHOUSE Codes: 097/ 100

Four digit codes for white westinghouse are : 0100 0130 0138 0136 0227 0279 0080

four digit codes for wetinghouse are: 0143 0114

OK

The SK-32H240S has two sets of mounting holes 75mm x 75mm VESA or 100mm x 100mm VESA mounts.

I hope this helps. The manual is available here: http://www.retrevo.com/support/Westinghouse-SK-32H240S-TVs-manual/id/2727ag925/t/2/ . You will need to enter a code to download the pdf.

Cindy Wells

The codes for your Jumbo Universal Remote to control a Westinghouse television are 097, 100, 130, and 155.

To program your remote by entering a code, follow these steps:

1. Turn on your TV.
2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
   
5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.

I hope that helps.

I don't have DTV anymore, so I don't remember the exact code I used for my SK-32H240S, However, I do remember that I found one that worked at this site. Scroll down to locate your remote series # - it most likely will be printed on the upper left corner of the front of the remote - as an example, mine says RC64. Click on the corresponding listing, then follow the directions on the site. I tried only a few codes before finding one that worked correctly. Good luck.

I used a Sony code 10111 that works. Sony makes components for Westinghouse.

I just tried a Sony code for my Westinghouse tv after reading other sites, and it worked. The code that worked for me was 10000