Itunes Can Coby MP-C582 play files from itunes?

yes, connect it and let it charge for several hours.

Hello,

For the MP-C582 there's a pdf file for specifications and a manual.
PDF files can be read with Adobe Reader. Once openend the file in Internet Explofre the pdf file can be saved onto a location on, for later view.
(When not having Adobe Reader, get the reader here:
http://get.adobe.com/reader/ )

Specsheet:
http://www.cobyusa.com/files/specsheets/MPC582_SP.pdf
SPECIFICATIONS
Memory Flash
File Format Support Audio: MP3, WMA
Plug-and-Play OS
Support
Windows 98SE/2000/ME/XP or newer
Macintosh OS X or newer
PC Interface USB 2.0 Hi-Speed (MSC)
AV Output 2.5mm Headphone
Power Integrated Rechargeable Lithium-ion Battery

Manual:
http://www.cobyusa.com/files/manuals/MPC582_MN.pdf

you should be going through the coby manager then it taken care of

If you need further help, reach me via phone at https://www.6ya.com/expert/scott_541ceb86d69e7743

I HAVE THE PROBLUM THAT THERE IS NO DISK IN DRIVE H PL INSERT DISK DRIVE PL TELL ME THE PROBLUM

Reset the device and charge again. You will lose the data but the drive should work. If that doesn't work it may be the battery.

Thanks,

I work for Coby technical support. Our customer service phone number is 1-800-727-3592.

Your music may be in the wrong format or it may have DRM protection which is a license created by the recording industry. If you call our tech support number above, we can walk you through discovering why the music won't play.

Coby players can recognize .mp3 and .wma audio formats. If you're pulling the music from iTunes, it's in the wrong format and will not play on a Coby without being converted.

If you feel this solution doesn't deserve a good rating, please let me know why so that I may better assist you. If there is anything more I can do to help, I will!

make sure what your putting on is MP3 or unprotected WMA files. If the light is blinking, then it means its playing the song, if you hear nothing, the audio is not in the correct format.

I have the same player. Are you just dragging and dropping songs on to the player? I use Windows Media Player 10 to put music on the player. It has a function called SYNC. What that does is take your music from WMA 10 (WMA, MP3 files, etc...) and transfers them to your mp3 player. You might give that a shot. Also, WMA 10 should recognize your player and let you connect with it.

Sometimes I must hold the play button down for over 7 seconds on my unit to get it to turn on. See also the answer to the question on properly charging the unit; i.e, have the slide switch in the "off" position.
If you are using a USB hub to charge the mp3 player then the hub must be powered.

Do they have2 drivers for Vista, mine still isn't working