Panasonic sdr-s7 camcorder broken lcd panel

This is usually caused by a defective CCD image sensor and can be repaired fairly inexpensively. However, it’s not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I’m a professional repair technician with over 20 years in the business and have repaired many of these. I’m semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Questions of this nature have been asked before, and the general consensus of opinion is that it is not possible. As webcams are available on Ebay for as little as £3, that may be the best course of action.

UNFORTUNATELLY NOT,SORRY.

if the video out is also red(try a tv set or monitor connected in composite out) then problem in ccd or video sircuit board ,must be replaced...

Before connecting the charger keep these in mind: volts current in amperes, polarity. If anything goes out of range your camera may burn out. Don't try a 'min' or 'max' just use the exact charger ratings. In electronic stores there are these variable adapters available on which the output can be varied. Get one of those, they are cheap and you can use them to charge multiple items.

transistor burned out inside power board,better buy an external charger

The best solution is to get a replacement CD from Panasonic at
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/Hard-Disk-Drive/SD-Camcorders/model.SDR-S7A
They may replace the CD at a reasonable cost (or free plus S&H). Otherwise they can suggest other editing software that can upload your recordings to the PC.

Go to Radio Shack, bring your camera, and they will sell you an AC adapter part number: 273-1696 for $30.

I have the same here.
Do we need to install?

Hi,
Night mode selection is indicated in below picture.
Need further help, please let me know..