Philips 50P8341 50" Rear Projection Television Logo

Related Topics:

Posted on Dec 26, 2007

Turn on power, but no picture, when you turn off power see picture for a few seconds before tv shuts off

When I turn on my Philips 50 inch tv the red power button lights up and it sounds like TV turns on, but there is no picture and no sound. When I turn the power off, you can see the picture for a few seconds before the tv turns off.

Please offer any assistance.

thanks

  • 12 more comments 
  • ASDE Dec 29, 2007

    it comes on but no sound its two pink ones and one yellow one

  • Anonymous Jan 05, 2008

    my phillips 50 inch tv turns off automatically. sometimes it comes on right away, sometimes it doesnt. also, the screen has turned a little red. Can anyone give me advice on this? its extremely frustrating and need help!! if you know what i need to do, PLEASE email me at [email protected]



    Thanks!

  • gsa_072777 Jun 30, 2008

    TV Model: TCL-2109 , only standby mode if power on, no display in the screen...any help? on how to start troubleshooting?

    thanks


  • Anonymous Jun 30, 2008

    We hear a click, but no red light on power button, no picture,no sound, nothing.. Help we love the tv just not ready to upgrade.

  • hardin f Jun 30, 2008

    When we turn the power button on there is no red light no sound no picture nothing we love the tv just not reday to upgrade.

  • par18donna Aug 22, 2008

    Turn on power, but no picture and no sound please notify when a new solution is offered.

  • Anonymous Aug 27, 2008

    same

  • jimjoamber Sep 13, 2008

    I turn on the tv but no pic or sound, it use to go by it self but now it don't do anything now but on & off light work

  • bcsd_253 Oct 28, 2008

    I heve the same problem. Mine will sound like it is coming on and then will just shut off again

  • tgarnerracin Jan 21, 2009

    I have the exact same problem after I sucked out the cob webs with a shop vac. TV worked perfectly before, it just had a cob web that was bugging me when I would watch a movie.

  • hcasil Jan 25, 2009

    no sound no picture

  • boytoy 2009 Feb 27, 2009

    phillips 50p8341 ser num 58852723 power butoon lighst up clicks in the back 4 or 5 seconds later it clicks again and the power buttons blinks in sections of 3

  • orlando1977j Apr 21, 2009

    Turn on power, but no picture, when you turn off power see picture for a few seconds before tv shuts off" problem, and notify you when a new solution is offered.

  • Anonymous May 03, 2009

    red light comes on but no picture and no sound

×

2 Answers

A

Anonymous

Even, I have the same problem...looking for a help on internet but not finding any...if you know...please post on this site.

Thanks,

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jan 05, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jan 05, 2008
Answers
1
Questions
1
Helped
497
Points
1

Did you ever get your problem fixed? i have the same problem and its frrustrating. i fyou can help me please email me at [email protected].

Thanks.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Having problems turning on 2 year old Phillips

Philips TVs tend to have issues with bad capacitors in their power supplies. Failing capacitors tend to have slightly different ESR (equivalent series resistance) values when they have been left off, versus after they are warmed up and charged up. Either a new power supply board or replacement of the faulty capacitors will fix the problem.
5helpful
1answer
0helpful
1answer

Red blinking light on tv?

unplug tv overnight. if that doesnt work the powersupply is probably bad.
6helpful
2answers

Philips 50 Inch Plasma Model 50PF7320A/37 will not turn on

Commonly it's going to be a power supply related problem. The two boards that need to be looked at is the Main Power Supply Board or the power supply board for the screen. The one that powers the screen, some manufactures call it a Backlight Inverter Board.
If you have some electronic experience, you can sometimes find a Service Manual for the TV over the internet for less than $20. It will have the all resource material for repairing your TV model. It's just the matter of replacing the bad part on the circuit board.
1helpful
2answers

My 50 inch plasma

We have a 50 inch magnavox plasma screen. We found and used a fix from fixya! It only costs us $34.00 campared to the $300.00+
anyone wanted to look at it. The problem was on the powerboard but was two little capacitators with the model #3300 10v. We carefully took the back off the tv and removed the power board, went to a local electric supply store and bought the 2 parts for $2 each, we then found someone (tv repair shop!) to sauter the new ones on! Got it home put it back together and it stayed on, no depressing shutdown after a few seconds! you can find a picture of a fried capacitator on yahoo images, they are supposed to be flat but if defective will be bubbled at the top or even split! I am calling Magnavox today to complain that they are not recalling this part that should have been a better quality capacitator! Hope this helps some people!!
0helpful
3answers

TV turns off by itself & won't turn back on til unplugged, then plugged back in

Well, first your model number is the 42 inch, but I digress...

I had a similar problem with a Viewsonic 27 inch, with the blinking power light on a failed power-up. It turned out that replacing the power transformer was the ticket. However, as I have the 50 inch Panasonic plasma, I know that the transformer is built into the set itself. I'd still suggest that this is what needs replacing though, as this is different from a set being on but having no picture.
0helpful
3answers

Plasma will not turn on

Sounds like u might have a bad power supply
4helpful
3answers

Panasonic 50 inch Plasma

it could have over heated you can try to reset it first unplug it for about five minutes and try to turn it on if that dont work the remote might have a set button try holding that down until the red light flashes twice, then turn it on if not then hold the power button down on the set for a good five seconds to see if that resets it. if none of that works you will have to go to panasonic .com for the reset instructions.with the red light blinking the power supply is most likely good you just need to reset i.
Not finding what you are looking for?

507 views

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...