Question about Maytag Neptune Washer

2 Answers

On my Maytag Neptune MAH-3, the water is running non-stop

On my Maytag Neptune MAH-3, the water is continuing to run and fills up the front load washer and won't stop unless I turn off the water manually.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 233 Answers

Check inlet water valves cold & hot one may be sticking open & can't shut off. The timer may not be shuting off valve , voltage needs to be removed for valve to close. Pressure switch cuts the valve off but goes through timer.

Posted on Apr 30, 2013

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Check plastic hose out side of tub to pressure switch
if ok replace pressure switch

Posted on Nov 02, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On the Maytag Neptune MAH 5500, the timer is running through its cycle without stopping to complete that cycle. In other words if rinse is selected the wsher fills partially and you can watch the timer...


Hi


Thanks for using FixYa. It seems to be an issue with the Timer motor going bad and should be replaced to resolve this issue. Everything seems to be working fine as the washer is filling with water spinning etc so it is the Timer that should be replaced.
Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 21, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

My frontloader washing machine I(Neptune MAH


unfortuetly that is a common problem with that unit. it will continue to have wate in it afte the cycle has ended. i hate to say it but there is no solution for this proplem. I would recommend that you contact Maytag and let them know your disappointment. sorry for that news.

Oct 13, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Water fills and overflows the dispenser department.


if car over heats u might have a head gasket problem or ur thermostat is stuck not letting the fluid circulate

Mar 22, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

MAYTAG NEPTUNE MAH9700AWW continues to fill on rinse, code "oe",


if the water continues to fill even with power off, and you have to manually shut in off at the wall valve, the 3-way inlet valve is stuck open. you have to replace it. $90

Mar 02, 2009 | Maytag Neptune MAH9700 Front Load Washer

1 Answer

Maytag Neptune MAH-1 won't stop filling with water


A couple things may be going on here... you may not want to hear, but the Neptune has a had many "consumer related problems".

If your complaint is "will not stop filling with water" I would access your inlet water-valve (typically blue with 2 black battery looking solenoids; where your water-lines connect directly), test for continuity and replace as necessary. Sometimes inlet-water valves also go bad where the complaint is: "no water comes in at all".

Jan 26, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

MY NEPTUNE MAH4000AWW WORK WHEN IT WANT TO WORK


Check for low water pressure. Clear screens in inlet valve. Do-not remove screens. This unit will turn off if not filled in specified time.

Nov 08, 2007 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

MY NEPTUNE MAH4000AWW WORK WHEN IT WANT TO WORK


Sounds like you have an intermittent problem with the board or one of the on board switches.

Oct 22, 2007 | Maytag MAH6500 Neptune Front Loading...

1 Answer

Water fill


Try unplugging the unit. If it stops filling you have a control board problem. If it continues to fill, you have a bad fill valve that is not closing properly, usually because of dirt or scale buildup thats gotten past the inlet screen on the valve. Good Luck!

Oct 05, 2006 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

507 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...