At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the button is on your tv factory remote control. a universal remote wont work. now you can try to physically go to the channel down button on the tv. keep pushing it until it counts down the channels, then it should go to video 1, video 2, line video, front video. fixed! enjoY!
Unfortunately, with most TVs this function is located only on the remote. If you could do it without the remote there would be a button on the panel of the TV labeled accordingly.
To purchase a replacement remote (a universal remote won't work with that model TV) call Fox International at 800-321-6993. They are the largest Orion parts distributor that I know. Orion doesn't sell parts directly to the public.
I hope I've provided you useful assistance and that this information
allows you to make an informed decision as to how to proceed from
here. Please be sure to vote on my response. I hope I've earned a
good rating from you today.
Please post a comment if you need
additional assistance so that I can help you further.
if you dont already have the remote set up then find the codes and t it up. the remote should have a button that says either tv/video or input. depending on the tv it should take you to a few channels through this button. look for either input 1 or 2, or even GAME. these should be the channels it will play on.
I found this on Bob Vilas website, it worked for my t.v. hope this helps someone else out-ttu821 "This will probably work for most Orion V-chips... I figured it out looking at another manufacturer's instructions, on my Orion it was: * Turn the volume down to 0 * Change to a blocked channel (where it asks for V-Chip password) * On the TV (not from the remote) hold the volume down button * (While holding volume on TV) hold the '0' key on the remote for between 2-10 seconds... * The screen should unlock, and you should save no V-Chip restrictions. You can now use your manual to find out how to set the restrictions you want."
×