I just bought the Pixma i2600 printer. Is is

It is most likely referring to the Windows print spooler. I would uninstall the software installed so far and go to the Canon website and download the drivers specifically for your operating system. This can sometimes occur when you have drivers for an older Windows version and are installing them on a new Win7/Win8 machine. Also check compatibility some printers are not compatible with the newer operating systems.

Hello.

Yes .. depending what operating system you have installed (Windows XP, Vista, etc.).

Here's a link for your Canon printer:

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp780?selectedName=BoxContent#DriversAndSoftware

Select your operating system, download and install the driver.

Hope this helps.

Go to the link below. You will have to select your operating system (OS) and the correct drivers will appear in the lower section. Just double click on the file name (it should change the text to color red when you put your mouse over it). You can also download associated software for it from there as well. If you need instructions on how to set it up, from the same web page you can select Brochures and Manuals and download the manuals for your printer. Hope this helps
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip2600#DriversAndSoftware

Your allinone is not compatible with new OS as you have already figures out. Contact the Company..hp and see if they have an updated disc for MS7.....

If you can get your hands on a new disc for the HP AIO's they are all similar...and you can try reinstalling using it.

Go to Walmart...buy new HP AIO.....install disc..connect old AIO....take back new one with disc.....problen solved. walmart will accept all returns.

not all print cartridges are compatible with any printer. You must make sure that BOTH cartridges you bought are compatible with the printer.

goto > http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=17105

Enter the Operating system.

Download the new driver

Pixma MP600 series is compatible with windows 98.

More models on following list

windows 98 compatible printers Printers

Sory M8, i think its not made for ME
Compatibility:
Operating system(s): Windows 2000, Windows Vista 32bit, Windows Vista 64bit, Windows XP, Windows XP x64



Here is some info about your printer
http://software.canon-europe.com/products/0010486.asp

System Requirements Windows 2000 / XP / Vista Pentium II (including compatible processors) 300MHz, 128 Ram, 800MB HDD, CD-Rom Drive, XGA 1024 x 768 resolution, Internet Explorer 6.0 and abovei have pasted it from the canon webstie, it is compatible with xp

ok..remove the old printer, then go here for up to date drivers(do NOT use the cd)