At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Can you tell me how to turn on the PC input on a samsung television. Possible inputs at the moment are AV, Ext. 1, Ext. 2 and DTV. PC is an option but appears to be blanked out as if not available.
Re: Can you tell me how to turn on the PC input on a...
Is the signal being applied to the set when you try to access the PC input. A lot of sets won't let a PC input be accessed unless there is an active signal.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it did work before, it should work now. But if you are connecting a new device, make sure you are using the right inputs.
Yoou still can get the manual online, but to point out what I mean I send one picture about how to connect (Only one example) where you have to use 3 colours on the cable.
When connecting a video recorder (low quality, you only need 1 colour, for the composite entry (Yellow)
HDMI inputs are listed as either an AV or EXT in the menu. The easiets way is to play a disc on an HDMI source and look throught the channel listing of either AV or EXT inputs. Hope this helps.
If the set is normal on AV inputs or thru the coax input--but has problem in the DTV(HD) I would suspect whatever is giving it signal(it is component input) is the problem--the component input for DTV could cause this problem--red,green, blue carry not only video but chroma information---if you are using a direct TV box of some kind return it and get another---only other possible cause(Long shot) would be to do a factory reset on thisTV--All Mitsubishi sets have an option menu which resets the whole set back to condition it was when new in the box--If you want to try this verify model number to me and I will tell you how to do it--Remember: the set is not smart enough to know which input you are using--if you have a problem only on 1 input--it usually is not the set--it usually is what is connected to that input.
If you have questions or need more help contact me by replying to this post.
I do this here for free so if this helps you take a moment and give me a vote here.
Dont know your specific model, **** some new tv's will only allow access to av inputs that is connected with cables and a component. Move your cabling from ext 1 to ext 2 or 3 and see if you can access the av ext. If still no access on ext 2/3 the av input board or backup memory could be faulty.
You will not be able to record local station from a DTV converter connected thru a directv receiver unless there is a a/v input on the directv samsung receiver. Also check the user manual for this receiver if recording from an external source such as a DTV converter box is possible. The answer to seperating the DTV converter box from the directv samsung receiver is possible if your tv has multiple inputs. Try connecting the DTV box to the RF input and the directv samsung box to an a/v input then change inputs using the tv remote. you will need an av cable (yellow/ red/white) for the directv box and a rf jumper cable for the DTV box.
There is a PC/DTV RGB input area with two audio jack inputs. The input is a standard 15 pin PC jack. Hook it up to your PC video card input. You can get the audio cable from Best Buy or a electronics store...split RCA on one end and the headphone jacks on the other to your PC. Then select the TV/Video source button on your remote until you see PC/DTV YPbPr screen appear. It will search for the signal, find your PC and display the screen. You may have to go to MENUE on your remote to adjust the HDTV (1080i) frequency.... an option that only appears if there is something hooked up to the PC/DTV RGB signal input.
×