At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
What do you mean by the leads are "flat type" on the Marantz? Are you referring to the speaker wire output terminals? If so, the graphic equalizer should be connected to the pre-amp input of the amplifier, not the speaker level outputs.
If the Projection Monitor does not operate properly, reset it as
follows:
1. Turn off the power of the unit with the MAIN POWER switch.
2. After approximately 1 minute, turn on the power with MAIN POWER switch and POWER button.
tape out from reciever to line in on the eq --then line out from the eq to tape in on the reciever --whenever the tape monitor will be used on the reciever the sound will then be equalized
×