Westinghouse LTV-40w1 HDC HAVE SOUND - NO PICTURE

Possibility Video Board input Dammage, Cause Bad Solderring Betwen Connector Check IF board for Bad Connection Posibility Capacitor, Filter issue

I have one ($90) but take the old one out first to confirm the part number because they used two different ones. Need to use the same that was origanal. The wrong one will work but the FF and RW functions don't respond correctly.
[email protected]

I have the same issue. I am thinking I need to replace the T-con board. Did you get your fixed and what did you need or do?

You need a T-con Board and I have that one for $80.00.
I reclaim working components for TV damaged in shipping or returned for other reasons. Simple repair for any body with a Philips screwdriver. NO special tools needed.
[email protected]

You need a T-con Board and I have that one for $80.00.
I reclaim working components for TV damaged in shipping or returned for other reasons. Simple repair for any body with a Philips screwdriver. NO special tools needed.
[email protected]

I would to try the main board first.

i'm sorry i didn't notice the "dvd/tv combo". the dvd mech inside the tv will need to be replaced.

u will have to go into service menu to set sub brightness be carefull u may do more bad than good write down all valus before atempting to adj.

only get sound from my 42 lcd screen fro westinghouse, no display

The TV is rating protected or parental code for movies that are of a type not permitted on TV. Someone most likely set a code to screw with you. If you tried 0000 and 1234 with no luck. You may be able to find the factory rest or set to default that could clear all codes and wipe the channel scan... so you would need to rescan. Ask around to see if the boss set a code to keep prorn off the TV.