Hi, I recently purchased the omnitech jumbo universal remote control from
Staples to use on my 32" Vizio hdt.v., model number VX32L. However, I can't figure out what the control numbers are. Does anyone know? Thanks!
I have a solution but it is too much info for this tiny screen they have, and there is no support for photos. So, unfortunetly I have to send you to my photobucket account where I posted scanned pictures of the "Acual Manual" I hope the website doesn't get banned. Here are the five pages you'll need to set up your giant remote:
http://i162.photobucket.com/albums/t241/swestside/5.jpg
http://i162.photobucket.com/albums/t241/swestside/4.jpg
http://i162.photobucket.com/albums/t241/swestside/3.jpg
http://i162.photobucket.com/albums/t241/swestside/2.jpg
http://i162.photobucket.com/albums/t241/swestside/1.jpg
Use the search code. Turn on the tv then push the search code button next push the tv button over and over until the tv shuts off then push and hold the enter button for a few seconds. It works I just did it 5minuts ago on my Vizio.
Try www.remotecontrol.com .................T.
I can't get the omnitech giant remote to program for my dvd dvp 642 phillips. Does anyone know what the code is? I have tried several codes already without success.
SOURCE: omnitech jumbo universal remote control and vizio hdtv
I have this remote. But I don't know what you mean by control numbers? Do you mean codes? You can program it by holding down the code button till the red light stays on, then punch the button you want to program, tv or dvd, then press power till your machine comes on then press enter.
SOURCE: omnitech jumbo universal remote control and vizio hdtv
Here are the instructions for auto code search from the Omnitech manual:
Automatic Search
There is another way to set up your controller, that does not use the brand code lists. You can let your
controller search through all of its available codes automatically in order to set the connection to the
target device. To do this, follow these steps:
1.Turn on the target device.
2.Point the controller at the target device and press and hold the Code Search button for around 3
seconds, until the LED light stays red.
3.Next select the type of device the target unit is by using the Cable/TV/VCR/DVD/Sat Buttons (i.e. if
it is a TV that you are trying to control, press the TV button). The LED light should then blink once,
then stay red.
4.Press the On/Off button on the controller slowly and repeatedly until the device you are trying to
connect with turns off. (Note: the LED light will blink each time you press the On/Off button). When
this happens, press the ENTER button in order to store the code and the LED light will turn off.
4,238 views
Usually answered in minutes!
Yes - I got my TV to work, however none of the codes work with my Sony DVD player. Anny suggestions? Thank you in advance
I have and Omnitech Problem...I lost the programing manual. Can anyone help with the code search steps and the steps for the remote to seaarch for a code if the ones I have don't work?
Thanks!
MY DIRECT TV REMOTE CONTROL CANNOT GET YOUR CODE NUMBER WHY
need the universal codes for the rmote mdel number 15331
i bought the jumbo omnitech universal remote and seemed to have misplaced my codes list. does anyone have the codes for sanyo?
just need the code to put in a universal remote
×