My wife and I have a brand new Nordictrack A2550. Straight out of the box after assembly the motor that moves the treadmill belt will not run when the start button is pushed. The control console emits several short beeps but the treadmill stays still. The incline/decline buttons raise and lower okay and the control console appears to working. Any suggestion?
Likely the cover of one of the motor brushes popped off. Unplug the machine before you pop it back in place, then try it again.
If that doesn't work, most likely it's the motor control board, or possibly the console, or finally just a loose connection behind the console.
But most likely, it's the motor brush cover. I've been seeing that alot with this model.
7,376 views
Usually answered in minutes!
When the red key is inserted the machine inclines up the declines down this is all it does
Console will not power off
my elliptical wont display anything accurately and the buttons don't work and it constantly beeps while its in use
motor belt slips
×