If the water comes out when filling, check your water valve by unplugging the washer when it is filling. If the water still runs, replace the valve. If the water stops, check the small tube that goes from the water pressure switch (in the consul) to the bottom of the tub. This must be connected without any holes or obstructions. If this is ok, replace the water pressure switch.
On this model of washer you have 4 separate components that could cause overflowing. The water valve, pressure switch, pressure switch hose & the air dome. If you have to turn the water off to prevent overflowing, I would recommend replacing the water valve. If you can turn the timer off & the water stops overflowing, I would recommend checking the pressure switch, hose & air dome.
305 views
Usually answered in minutes!
I have a GE WASE3120 washer and after it reaches the desired level the water continues to come out, and this happens on any level of water
if you blow in the pressure tube the water stop and the washer works but when you reconnet it it doesnt want to work, how do i reset switch
×