After taking 2 pictures with my camera, it shut off

The manual is explaining how to work when you can't shoot pictures on page 181 and 182. To much to repeat it here. The manual is still online. But the shooting could be too much for your battery. As a precaution the camera shuts down. Try to recharge the battery. If that does not help, or perhaps you can take one or a few pictures before it shuts down, you know your battery needs to be replaced.

This happends due to high noise. Select night mode from the camera and turn off your flash. This hels in getting clearer pictures

hey 1 9700 nt takin pic but is recordin

Hello

Thank you for using FixYa for your problem

Always check the batteries first but if is it still giving the same fault, your camera is faulty.
It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras have any user-serviceable parts.

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

when you purchased the battery minimum charging is 48 hours.please charge fully battery and then use it.I hope your problem will be solved.sometimes we are not charged the full battery and then battery life is also effects.

Just look at the cam as an external HD. Then you can browse with Explorer, find the pics and copy/paste to the NT machine. After the paste, delete from camera. Don't cut/paste and possibly lose all.

OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren't loose, using the pencil eraser and banging it. I am not making this up. It was my last resort and it worked. Good luck!

Check your battery tray and that it has clean contacts. I'm sure you will find that if you place some pressure on the tray to push the batterys in just that fraction more when you take a pic that it will work fine and wont do the annoying beep and shut off. Maybe it has become a little loose over time and isint quite as tight on the contacts as it used to be.

U might need to change the mode in which u are taking the pics. Try setting it to Auto mode.

congrats mam....

did you leave the batteries inside the cam or take them out after use...

take out the battery and wait for 5 to 10 minutes..

have you tried using the adapter??