At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
WILL INDICATE FULL CHARGE AND THEN FAIL AFTER A SHORT PERIOD OF USE , POWER INDICATOR LIGHTS WILL 'RUN UP AND DOWN' THEN GO TO LAST BAR AND FLASH, THEN SCOOTER STOPS. SWITCHING OFF WILL RESTORE LIGHTS BUT THEN AFTER A FEW YARDS THE SAME PROBLEM REOCCURS. I HAV E BOUGHT NEW BATTERIES BUT PROBLEM STILL EXISTS.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please first check that the volume is turned up on your device. Then, I would advised changing the power source .
If still no sound, please power down your device for 10 minutes before turning on again testing the sound. If all else fails, please view the troubleshooting section of the device manual next.
charge to at least 50%. (For storage purposes, so that the battery won't get messed up).
You can tell this by checking the battery indicator (bars, icon or percentage) periodically. If it shows 50% or an icon that shows a battery half-full.
sorry if this was confusing, as I am tired.
The flashing blue light indicates the battery is nearing full charge. If the light is continuing to blink when you reach 100%, I believe this is an indication that the battery is beginning to fail and will not hold a full charge.
Power light indicators on flashing red as warning that battery is almost depleted of functionality. ascertain that devices with extension cables deriving power from elsewhere are plugged in to reattain power to acheive regular functionality. For example, devices with red light indication as power warning would also flash yellow or green when in full power charge from another source. refer with devices user guide or manual for refering, diagnostics.
The control systems on power mobility equipment have a "prevent" circuit that immobilizes the equipment while it is plugged into a charger, so folks won't take off with it plugged into the wall outlet. When you turn it on when plugged into a charger, the display will flash constantly, or sweep constantly, depending on the manufacturer. This is normal. Your off-board charger should have a red light to indicate power to the charger, and another light for the charge status. Yellowish means it is charging, when it turns green, you are fully charged. If the status light is green all the time, that is an indication that the charger is not functioning properly, or that the batteries are below a chargeable state. Check charger output, which should be 26-28 volts dc, and each battery should show at least a 12 volt reading, but around 13.5 volts with a full charge. If one or both of the batteries drops below 12 volts after a short period of time, it's time for a fresh pair. Fully charge new ones before using the chair.
Change your AC charger. It's NOT charging "When the laptop is plugged into the AC, the power meter in windows
tells me that the power source is still batteries, and the battery
level drops by about 1% every few hours" That's the reason why: "battery has completely died" If you do not change it you'll continue to "still it gives me the same low battery indication and will not turn on.
"
The error code 0146 and the battery are two separate problems. First the battery problem is simple, it's bad and needs replaced. It being bad can refer to a developed short, a fail safe kicked in, or it's simply worn out. It is a battery after all, ad they don't last forever, the more you use them the quicker they wear out. A bad battery causing an issue is vary common with Dell machines, and a false battery reading with a failing battery is also common. The orange flashing battery light is the indicator that the battery isn't working properly, either by fail safe or wear.
The error code 0146 Is from the short test on the hard drive and indicates the a sector is going bad, and eventually the hard drive is going to fail. At this point, your hard drive may last days, or months. Either way, I suggest that you back up all important data, and purchase a new hard drive for the imminent failure. You might even go ahead and set it up, this way you'll be prepared when it does go, and you won't have any downtime.
×