Error code E013-002

It beeps to tell you there is an error. While it is beeping & before pressing any buttons, read the error code & write it down. The error code is the lights along the top row. Count from left to right and make a note of exactly which lights are on and which are off. There are 8 lights, you need to say exactly which number light is on. Post the result back here and someone will tell you what that error code means.

see a relative link
http://www.hondacarforum.com/honda-3/22348-2000-honda-civic-radio-error-code-problem.html

Same problem here....prestige pic 6.0....panel shows error code bCdE...if someone tell me the issue for this error..it will be helpful....thanks in advance..

Read the operators manual and it will tell you what to do

hello i m french f10 is a problemn of the temperature sonde that give gou the temperature of your gaggenau

79 is fan motor current fault or circuit board you will have contact rheem

try *#7370# or *#7780#
default scurity code is 12345

This is information from the Tech Sheet.

Fault Code F2 - Error Code E1: Code Explanation: Keypad keytail not connected. Recommended Repair Procedure: 1. Check keypad connector for firm connection. 2. Press CANCEL. If error code returns after 60 seconds, replace keypad. 3. Replace control.

7410 error

most likely you need to push the drum back till you hear click (drum at the left side at the prt)