Hotpoint Aquarius WD63 Front Load Washer/Dryer Logo
Posted on Jan 08, 2008
Answered

Not draining after cycle

Hi,

Our washer dryer is not always draining after a cycle. When it's finished there is quite often a big puddle in the bottom of the drum and the clothes are soaking wet. any ideas?

Also, the clothes are quite often more damp than when we started when wwe tumkble dry them.

Please help!

Answer This Question
  • shackjon1 Aug 30, 2008

    My Hotpoint WD63 is not draining after wash, I have looked at other
    solutions but these don't seem to help. I cant find the filter referred
    to in other comments to clean it. I have tried putting the washer on
    spin but this doesn't seem to help.

  • Anonymous Sep 13, 2008

    Hi, there is a big pool of water after a wash cycle. I'm assuming it is a blockage in the filter. How do I access the filter to check? Or could it be a different problem?

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Sep 13, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 13, 2008
Answers
1
Questions
0
Helped
266
Points
1

Hi, there is a big pool of water after a wash cycle. I'm assuming it is a blockage in the filter. Where is the filter so that I check?

Cheers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jan 08, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jan 08, 2008
Answers
1
Questions
0
Helped
266
Points
3

Try checking the filture on the front at the bottom of the machine they some times get full of muck

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hi, We just moved into
On the bottom of the rubber seal, there is a drain hole. Check to see if it is clogged and clear it out if it has an obstruction.
Read full answer
Jan 01, 2011 • Washing Machines
0helpful
1answer

I have a front load washer that will when it gets to the spin cycle, it will not finish the cycle, drain all the water and finish spinning the water out of the clothes. Sometimes it takes 2-3 times of...
Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101
Read full answer
Jun 12, 2010 • Washing Machines
0helpful
1answer

Fisher paykel dishwasher dd601I runs complete normal cycle and finishes normally. 2-3 sec. after completion the washer motor srarts to run and the f1 fault (flood sw. activated) is dislayed. When the power...
Hi

F1 code indicates an overfill condition which may cause when dishwasher can’t pump out dirty water due to a plugged drain hose.
open dishwasher fully ,dry up as much water as possible then put a hair dryer on hot and direct into the back of the cabinet you will see a grey plastic cover on the bottom floor this is the sensor run on full for about 5 - 10 minutes making sure the heat go into that area. Also don’t overheat your hair dryer, when finished close the dishwasher shut and start your normal cycle.

Thanks for contacting fixya.com
Read full answer
Jan 20, 2010 • Dishwashers
0helpful
1answer

Washer leaking from the bottom
make sure your drain pipe is not backing up when washer drains
Read full answer
Jan 10, 2010 • Washing Machines
3helpful
1answer

Washer giving F2 error during wash cycle, cycle doesnt finish
HI. this code represents a Long Drain issue.

If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed.

Press PAUSE/CANCEL twice to clear the display.

NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.

Potential Causes

• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump
Read full answer
Oct 26, 2009 • Whirlpool Duet GHW9150P Front Load Washer
0helpful
1answer

Drum still has water in it once the cycle has finished.
try cleaning firter or pump might be blocked .
Read full answer
Jul 07, 2009 • Bosch Axxis WFL 2060 Front Load Washer
0helpful
1answer

I have a Zanussi WDA1055W washer/dryer. I never
the water should only be filling up to approc 2in above the drum bottom...........look inside when its filling..........if its filling to nearly the bottom of the door you either have a faulty pressure switch or grit/dirt in the internal filter.......as a result the machine will not spin if there is too much weight in the drum
Read full answer
Feb 23, 2009 • Zanussi F1045W Front Load Washer
0helpful
2answers

Dishwasher maytag 945 awq
Door gasket or sealOver time, door gaskets and seals harden and lose their ability to seal properly. You can't repair the seals. You need to replace them if they've begun to leak.

Read full answer
Nov 08, 2008 • Maytag MDBH945AWW / MDBH945AWQ /...
0helpful
1answer

Washer/Dryer not drying
is your dryer a conderser type
does it have a tank that you have to empty at the end of cycles
if it does the filter that condensers the water from drying cycle
if that is blocked it will not work
Read full answer
Jan 25, 2008 • Equator EZ 3710 Front Load Washer / Dryer
0helpful
1answer

Washer leaking water from bottom
Probably a main tub seal, big job!
Read full answer
Nov 16, 2007 • Maytag MAV7600 Top Load Washer
Not finding what you are looking for?

View Most Popular

Aquarius WD63 Front Load Washer/Dryer

  • Washing Machines

Related Question

Hi, We just moved into

  • Washing Machines

Related Topics

276 views

Ask a Question

Usually answered in minutes!

Popular Questions

Washing machine has 1 minute left on cycle stuck door wont open programme not finished

Hotpoint Ultima WF860 Front Load...

Washing machine door wont open on hotpoint

Hotpoint Washing Machines

Code F-02 on hotpoint WT960

Hotpoint Ultima WF860 Front Load...

Error code f 05

Hotpoint Aquarius WD640 Front Load...

My hotpoint aquarius wd440 has flashing lights

Hotpoint Aquarius WD63 Front Load...

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...