TV turns on, but nothing works...stuck on one channel,withought picture or vollume changed the battery on remote too and unplugged and re-plugged the TV still doesnt wor...even the controls directly on the TV still do not work
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not sure if this will help but, I recently put an antenna on the roof of my house. I don't watch TV much but wanted to enjoy some TV, but my remote locked up and the side buttons on the TV wouldn't work either. I tried changing the battery, but no luck. There's a broadcast station 64.2 that is locking up TV's & remotes. Here's the fix that a TV repair co. gave me which did break the lock of the station 64.2.
1) unplug antenna (not roof but connection from TV to wall)
2) unplug and plug back in TV
3) find a way via remote or side buttons to scan channels
4) Go to Menu
5) EZ Setup
6) Channel Set Up-Scan Channels
7) Channel Memory
8) Digital Set Up
9) Turn Skip On for 64.2 (Delete this Channel)
10) Turn off TB
11) Hook Antenna back
You may have to play with the order to acheive the end result or figure out a way to delete 64.2, but during the process you will at least unlock from being stuck on 64.2.
lg tv can you go to main menu if yes go to channels settings and try auto program if still not then same page it have manual program go to that menu and add channels manualy and then turn off menu .by pressing menu button .and change channels
Pull out the power plug of your TV and don't use it for few minutes. Remove batteries from your remote and keep it without batteries for few minutes. After about 15 minutes your TV and remove both will work fine.
Perhaps you can try what I do when my KV24FV300 runs through channels and will not stop. Hard to watch and remote will not work. Nothing works but on and off from set.
Sony Says: Take all batteries out of ALL remotes that you use in any way for that set, VCR, etc. ALL batteries out. Turn TV off at set. Unplug TV. Wait at least 15 minutes then replace all batteries in ALL remotes. Plug TV back in and turn TV on from set.
Maybe, just maybe it will work. If it does not work why not call Sony, they always say that cannot happen but they have a solution for it.
take the batteries out of the remote...now check if you can change channels manually on the big screen.
if so the remote is stuck on one signal that channel u said. get a new remote.
if still same trouble on big screen look hard at the buttons and make sure none are jammed.
also try to get to your setup menu and auto-program the channels it should search everything and then try changing channels.
new stuff alot times plugs come loose, goes back to the factory workers...not pushing them tight
have a tech check that at your home.
ok, let's try the simplest things first....
unplug the tv from the wall, and remove the batteries from the remote. wait about 5 or 10 minutes. reinstall the batteries and plug the tv back in. try it again. actually since you said you tried another remote, you can skip removing the batteries from the remote.
if it still does it, try unplugging the tv overnight. if it still doesn't work right then, you have a processor problem, and need to have it looked at by a service tech.
×