Incorrect disc, err when disc is put in, will spin for 1-2 seconds, stop, then spin again for very short time. Then message display of incorrect disc. Basically, how to keep disc spinning so it can be read.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can clean the lens with a small amount of windex and put a little oil like 3 and 1 oil on the spindle motor shaft and on the sled rails. Good luck !
Err 11, Err 12, Err 14, Err 17 Dirt or a scratch on the disc stops the laser beam from being able to focus. Dirt or a scratch on the disc hinders the track
Clean or replace scratched disk.
There ya go, clean or replace the cd that is displayed.
The problem is in the mechanism,maybe when you put another disc while playing that is cause. There is a misaligment there in the tray you better checked it out,and also the lense by using a cotton buds.thats all for now Hespbb....
Error one is unique to the disc being inserted into the player.
According to the service manual, this is the exact statement:
Err 1 appears on the display:
This indicates that the disc is dirty, scratched, damaged, incorrect (as in a "burnt" disc), or has been inserted upside down. Clean the disc or insert it correctly.
Toyota CD players are very sesnitive, and the svc manual specifically mentions not to use anything other than "store-bought" CDs.
i had err 2 screen. removed case (about 10 screws, took just a few minutes) and found 1 disc was had been knocked out of the tray. removed all discs. replaced case. works fine again
if your dvd player is 5 years old or more i suggest you trash it and get a new one but if its not try to clean the lens manually with a peace of bond paper. rub the paper gently on the surface of the lens
×