Fax driver I have a Canon-fax-JX200 but I have no driver and I can't find one on the internet !!!

Please send me an email to [email protected] and I will send you the manual right away. Please put CANON FAX JX200 in the subject line and I will send you the manual right away. Lawrence Brown

You can enable memory receiving feature temporarily.
1 Press [ON/OFF] to select .
􀁺 The fax starts receiving documents in memory.
􀁺 To cancel, press [ON/OFF] again.

If you would like for me to send you the user manual for the JX200, please send me an email to [email protected] Please put CANON JX200 MANUAL in the subject line and I will send you the manual right away. Lawrence Brown

Hi,

You can download the complete instruction manual in PDF format by clicking this link.

Click here to download the Easy Setup Instructions

• You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

No, sorry, if they weren't printed they are gone. You can only hope to print out a JOURNAL to find out who sent them.

You can get the manual on links below.

http://www.generalmanual.com/pdf/canon/FAX-JX200_JX201_Users_Guide_EN_US.pdf

Ease set up here on link below.

http://www.generalmanual.com/pdf/canon/FAX-JX500_JX300_JX200_JX201_ESI_EN.pdf

This is a link to Canon for your Fax JX200 Users Guide.
http://gdlp01.c-wss.com/gds/0900007827/FAX-JX200_JX201_Users_Guide_EN_US.pdf
CHECK 6000 code:
LineFeed signal is not detected.
The paper feed in the printer is not detected, the motor may be defective, or the transparent plastic disc on the motor, respectively, the corresponding sensor.

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=338&modelid=14787
Here is a link to the JX200 user guide...hope this helps.

Try to "slow" down the fax "speed"

my fax Canon JX201 displays the message CHECK 5100

I do not speak your language, but it appears you need instructions for the JX200. Go to canon.com, choose the correct country, go to Support, Downloads & Drivers, and then the manual should be listed. Thank you for using and rating FixYa - and if you need more help, please post back in English. Thank you!