Install mk - Kyocera Mita FS-3830N Laser Printer

you can reset the counter but on the falcon engines if you go past the maint. cycle they will eventually fall down and print solid black copies.

Press Menu button, then press the up arrow until you find the Adjust/Maintenance. Press the right arrow and search with the up arrow the Service choice. Then press the right button and search with the up or down arrow for Maintenance. Press the OK twice and the Install MK will disappear.

It is telling you that it needs a Maintenance Kit fitted.These are fitted every 500,000 A4 pages.

MK is maintenance kit. It is a kit of items that need to be replaced ie drums/fusers etc. Hopefully you will have a service contract which includes this item as you may well find the cost too much?

MK is the maintenance kit. You can check the Kyocera site to find out where to get a new kit and how much they are:

http://usa.kyoceramita.com/americas/jsp/Kyocera/products_printers_details.jsp?pid=12331

Most of the time the message is just displayed because the machine has reached a certain number of pages, but it should still let you use it normally.

Its because you've gone past a certain number of pages printed.

Its asking you to install a new Media Kit

To reset the message -

1 Press the MENU key.
2 Press the or key repeatedly until Life Counters > appears.
3 Press the > key.
4 Press the or key repeatedly until >New Toner Installed. appears
5 Press the ENTER key. A question mark (?) appears.
6 Press the ENTER key.
The toner counter is reset. The message display returns to Ready.

You have done more than 300,000 pages. I wouldnt waste your money on a Maint Kit, just stretch it out by doing the following.

Press Menu/Ok (Main menu)
Go into [>>Service]
Then press the right arrow.
Then find [>> Maintenance]
Press the ok key, then it will show [>> Maintenance?]
Press the ok key twice, and it will reset all the counts on your consumable components (Drum, Developer, Transfer Roller, ETC)

it needs a maintenance kit... call kyocera support to see which one is required...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

please i need to solve the problem with my webcam i need the drivers to install this, please is ery urgent!! thanks for all

mafe

Machine maintenance(400,000 printed pages) Content of MK : Fuser assembly,Developer assembly,Drum assemby, various feed and other rollers,transfer assembly etc...

BR