No sound through home theatre with blu ray connected

NO AVR here right (I can't see what is THERE total)

why not test the (local LG speakers work ??????_??? fails?

3D blu Ray player and 5 wireless speakers model HB966TRW,on something else. the amazon reviews on it are 50%bad
why own it? I ask. and sub is junk grade.
76 page manual.
how are you connecting this to your TV , HDMI or>
if yes did you turn on ARC? as page 21 states
and SIMPLINK too.

or RCA video cables, and sound RCA the TV
so there are 2 ways to connent and HDMI tops list of good.way
so you can test this on 2 TV , HDMI to see which one fails.
or both fail.

or page 38 do the factory reset...
and start again as new day 1 , setups.
at the bottom click english and free manual is here 76pages.

https://www.lg.com/ae/support/manuals?csSalesCode=HB966TRW.BARELLK

Sounds like your Blu Ray is region coded. You will need to region-free the player so it will play them all. Normally happens with PALS formatting. You need to update the firmware on the device via using an internet connection. Sounds like it's out of date.

Also you may wish to follow the following site post. Excellent tricks to make this device region free.

http://www.videohelp.com/dvdhacks/lg-bd370/10016

Hope that works for you.

Is this what you are looking from LG?
http://www.lg.com/uk/support/product/support-product-profile.jsp?customerModelCode=BD370&initialTab=drivers

You may want to read this also:
http://forum.blu-ray.com/blu-ray-players-recorders/115522-bd370-latest-firmware-8-16-693-causing-extreme-pixelation.html

Get a Wireless Access Point ($30-$50 average). A wire from WAP to the Blu-Ray player should work like a charm. The WAP pretty much takes your wireless connection and transforms it back to a wired Ethernet connection for devices like this. You can have your Wireless Router on one side of your house and the WAP on the other, right next to your blu-ray player with a short Ethernet connection between the two. The player will just see it as a standard Ethernet connection.

YOU NEED TO CONNECT OPTICAL CABLE (NOT INCLUDED) TO OPTICAL1 CONNECTION ON YOUR HB405 AND OPTICAL OUT OF YOUR TV. IF YOU ALREADY HAVE DONE THAT TRY PRESSING SIMPLINK BUTTON ON YOUR TV REMOTE NAD CHANGE THE SPEAKER OUTPOUT FROM TV TO HT(HOME THEATER).

try connecting your internet cable to a pc to see if the problem is not with the router, and if is not with the router then it's provably in the seetings of your blue - ray.

Try this is it may help to view DVD in Color

On the back of your DVD player you will find 3 cables one white, one yellow and one red these are also connected to the back of your TV. Keep one end connected to your DVD player and disconnect them from the back of your TV and reconnect them to the plugs on the front of your TV.

All The best

This fix solved the same problem for me. Set your DNS to OpenDNS servers.

Primary Server: 208.67.222.222
Secondary Server: 208.67.220.220

You have several ways to do this. You can hdmi cables from the two units and plug them into your tv if it supports hdmi and run the audio out portion on the back of the tv and hook that into one of the audion inputs on the surround unit. Or you run audio directly out of the bluray using rca, digital coax, or digital optical cable. Turn the surround reciever to the corresponding input that you choose to use.

Dont now your sytem but check Home theatre sytem must be switch to 5.1 display and not dvd display. if stil no sound check in setup off dvd for soundsetting like PCM, RAW , 5.1etc and select each one till you get desired sound.

Presume your conections from dvd to hometheater is conected 5.1 cables or 1 digital cable and not stereo(2cables)