MESSAGE SAYS RIGHT CARTRIDGE INCORRECT

- Make sure you are inserting the correct cartridge versions for your model. The Lexmark X5470 uses 32 or 34 black cartridge and 33 or 35 color cartridge.
- Ensure that both your cartridges have plenty of ink in them and not empty.
- You can also try to insert different known working cartridges to determine if what you're currently using is faulty or not.
- Try to remove the cartridges from your printer > close the printer cover > unplug/re-plug the printer into the power source to reset it > when the printer turns on, reinsert both cartridges.
Hope this helps.

This article in the Lexmark website will help you identify and resolve the "right cartridge incorrect" error message: Cartridge Errors on the Lexmark X5400 Series Printers

This happend to me you need to install new firmware for this trust me it works.

http://support.lexmark.com/index?page=answers&startover=y&locale=en&userlocale=EN_US&productCode=&segment=SUPPORT&question=firmware+5470#

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Are you sure that they are installed correctly, seated, etc.? Do you have the right cartridges? Have you aligned them?

Load new firmware from Lexmark web site for x3430 or it won't accept the new cartridge.

According to the Lexmark site an number 33 color cartridge is the correct color cartridge for the printer.

Are you trying to print potographs? If so, then you would need the #32 cartridge and the color cartridge together in the priter.

If you believe that the cartridge is defective, contact Lexmark at 1-800-232-3000 and let them know you received a defective cartidge.

Don

The compatible cartridges for the X4530 Lexmark printer are the # 23,23A,24,24A,31,34,35. If you have the correct cartridge number and still says cartridge incorrect, try this steps.
1. Get a damp and a dry paper towel.
2. Set the ink cartridge right side up on the damp paper towel so that the ink nozzles are against the towel and hold the cartridge in this position for about 15 seconds. ( try this for around 5 times )
3. Now wipe the print head (on the bottom where the ink comes out) across in one direction only (left to right) until it looks clean. ( try this around 5 times )
4. Next dab the cartridge on the towel to make sure that the ink is flowing.
5. Remove the power adaprtor behind the printer.
6. Using the dry paper towel, clean the metal contacts on the cartridge carrier inside the printer. ( try this 5 times )
7. Place the Cartridge back to the printer, connect the power adaptor.
8. Check if there is any error message. If same problem persist, try to contact Lexmark Technical Support.

I had the same problem. Downloading and running the patch program solved it for me. Follow the link below!

http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:570:0:0&docid=ENUS25374

Regards Robin

The messages Appears when the catridges are not inserted correctly........ Install the Colour Catridge on the Right Side and the Black should go in the Left Side...... Thanku

Fiend your solution direct from Lexmark. Here is your solution



http://www.lexmark.com/printer/prob676ijt65/solution
900