Question about HP Pavilion MX75 17" CRT Monitor

1 Answer

Mx75 monitor turns off when I awaken my computer

I always leave my HP mx75 monitor power button on when I turn off the computer (I do this because the spring behind the monitor's on/off button is broken and I have to shove a screwdriver into the power button to turn it off and on manually).

The monitor has always gone into sleep/hibernate mode when my computer (HP 734n) was turned off and the monitor turned back on again when I turned my computer tower on.

But all of a sudden, the monitor has started turning itself off when I awaken my computer tower from sleep/power it on. The monitor still goes to sleep/hibernates when I turn the computer tower off, but the monitor suddenly powers off when I turn the tower on.

I don't know if I've inadvertently changed the settings for my monitor or if there is something wrong with the monitor. Any ideas?

Posted by on

  • dmccruden Nov 25, 2009

    vjs_1991: "right click on desktop select properties(screen saver ) select monitor button in that select turn monitor never.(configure carefully)"

    Didn't work. That's actually what the default selection is on my system. It was that way before the problem started.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 79 Answers

Right click on desktop select properties(screen saver ) select monitor button in that select turn monitor never.(configure carefully)

Posted on Nov 25, 2009

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix start switch on hp mx75


Hello,

It shows that the switch of your monitor is malfunctioning, it is having partial contact, that is why it works atimes.

I advice you replace the switch so as to get maximum effective use of your monitor.

Take care

Apr 29, 2010 | HP Pavilion MX75 17" CRT Monitor

1 Answer

Keeps turning off


Make sure the VGA cable is plugged in all the way and screwed down. These units were made in 2002 so it may just be too old to go on. A repair would probably cost more than a new or used flat screen LCD.

Aug 20, 2009 | HP Pavilion MX75 17" CRT Monitor

1 Answer

LG PC Flatron W1942S How do I turn on the monitor after it has gone into what I presume is hibernation mode? If I turn the computer off and then on again it usually comes on immediately but surely I should...


Normally the monitor will resume when the computer resumes. Under normal circumstances when the computer has gone into hibernation a brief press of the power on button will awaken it without shutting down the computer. If this doesn't work then you need to check your hibernation settings.

Jun 08, 2009 | Computers & Internet

1 Answer

Can you tell me where USB port is located in HP pavilion MX75


USB ports are located on the back and also on the front on newer desktop PCs. These are on the computer tower - not the monitor as your posting is categorized. They are rectangular slots with four copper contacts inside.

Jan 30, 2009 | HP Pavilion MX75 17" CRT Monitor

1 Answer

Possilbe to reset monitor?


This document pertains to MX50, MX70, MX75 and MX90 CRT monitors.
NOTE: To reset the monitor to factory settings:
  1. Turn off the monitor by pressing the POWER button.
  2. Press and hold the plus (+) button and then
  3. Whith the Plus (+) button pressed, press the power button to turn on the monitor.
  4. Release both buttons.

Jan 01, 2009 | HP Pavilion MX70 17" CRT Monitor

1 Answer

Monitor turning on and off


try to get a second monitor that you know works and plug it into the computer. This will tell you if it is the monitor or the connection to the computer. If everything appears ok with the new monitor then you have to get a new one which is probably the case

Sorry for the news. Next time there is a big thunderstorm unplug everything and make sure that your computer is plugged into a surge protector at all times. This will save a lot of money and headaches

Jul 05, 2008 | HP Pavilion MX75 17" CRT Monitor

1 Answer

HP desktop monitor problem


hi try this ,,,
  1. Ensure the video cable is connected (and connected to the correct video port).
  2. Turn off the monitor using the monitor's power button and then restart the monitor.
  3. Cycle the power on the monitor as follows:
  4. Turn off the monitor. The power light on the monitor should be off. Leave the computer turned on.
  5. Unplug the power cord.
  6. Wait 5 seconds.
  7. Plug in the power cord.
  8. Press the power button on the monitor to turn on the monitor. One of two things happens:
    1. The image from the computer displays on the monitor and you can use the computer again. This indicates that the monitor was unable to detect that the computer had awakened from suspend mode. Turn the monitor off when it is not being used or disable suspend mode. For some computers, updating the BIOS corrects these types of suspend problems.
    2. The power light on the monitor comes on but the screen displays one of the messages again. The monitor is not receiving a video signal from the computer that it can detect and use. Continue using these steps to adjust the Windows display resolution to the Monitor's native (default) resolution
    3. Connect the monitor to another computer that you know is working to determine if the monitor should be serviced or replaced:
      • If the monitor displays an image from another computer, you know that the monitor works. Troubleshoot the video connection and graphics adapter on the computer.
      • If the monitor remain blank when connected to another computer, the monitor signal processing hardware may be bad. The monitor should be repaired or replaced.
      hope it will work for u .. little_angel

Apr 30, 2008 | HP Pavilion a305w (DM181AR) PC Desktop

1 Answer

HP MX 75 CRT monitor just quit working. No light on the on button.


...strictly as, at at best. a long shot: according to a post I just read somewhere online about this HP MX 75, pressing AND HOLDING the + button on the monitor front and at the same time turning the monitor on and off repeatedly, may fix problems with this monitor.

Mar 18, 2008 | HP Pavilion MX75 17" CRT Monitor

Not finding what you are looking for?
HP Pavilion MX75 17" CRT Monitor Logo

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...