How big of a processer can i put in it? - Compaq Presario 1275 Notebook

change condenser fan clean condenser coil dust at bottom of ref stopping cooling processes.Just like if you put cardboard in front of your car it will over heat or if fan is not blowing air on condenser coil
will not cool it fan and coil at bottom of ref. remove back you will see the dust pet hair a big problem with ref.

Have you tried to go to Control Panel - Appearance and personalization - Display?
You can try to change the zoom level.
And if you want to restore your computer, try to:
Insert the reinstall disk
Press F8 or F12 before Windows logo appears, click on the option to boot from a CD/DVD.

dont recomend it the process is a big job. start with the mirror cover 2 window switch3 pull handle 4 about ten screws in trim panel and aem rest. then unbolt window from window regulator lift out of door enough to tilt window to alighn it to trackes. then reverse for reassembly

In the side box. And the food to be smoked on the grill. Remember to keep the grill's hood/lid closed while smoking. Smoking is a low heat (225 - 250 Degrees) slow process. I always call it a "Low and slow process with big rewards."

Enjoy!!!

It is not really leaking water (did you put water inside?) ... that is probably condensate ... a by product of the cooling process. Are you in a high humidity area? If yes ... that is the primary reason for this water.

Here in North America, we think that only white wine should be chilled and then only to 'celler' temp (or about 55 degrees F.

You may be able to reduce the water problem if

(1) up the temp in the cooler (it isn't a refrigerator - don't use it as one)
(2) don't put 'hot' wine inside
(3) put a small fan blowing on the cooler to help evaporate the condensate.

If the water is a big problem, sit your frig on a big tray, similar to the one you might put under your car in the garge to catch dripping oil.

I hope you find these suggestions helpful.

Thanks for visiting and please come again.

Hi
When you put in the outer burr, the redo should be to the front. The outer red dot has to be at the back. Rotate the outer red dot clockwise till it lines up with the inner red dot. Try lifting the burr out to see if it locked in. If it didn't, reverse the process and make sure that you push down on the burr before rotating the outer ring. Move the big knob in the bean hopper to 0 (zero). Put the gasket on the grinder and replace the bean hopper. Once the bean hopper is secure, move the big knob to 8 and you set.

Hi,

I think its the thermostat fuse in the machine that have to be reset or replaced.

If you will send it to a repair center then contact Saeco USA to see if they can help you.

Saeco USA Inc.

7905 Cochran Road Suite 100
Glenwillow, OH 44139
Tel. 440-528-2000
Fax 440-542-9173
E-mail: [email protected]

Visit the Web: www.saeco-usa.com

Hope this will help you.

First, put charged batteries into your keyboard and/or mouse. Then, plug the adapter into the USB port. Then, press the big, round button on top of the adapter and the CONNECT button on the bottom of the mouse (not simultaneously). Then, press the big, round button on the adapter, and the connect button on the bottom of the keyboard (not simultaneously). Once the computer is on, click the mouse once, and everything should be working fine. If the mouse and/or keyboard do stop working, then either click the mouse once, try the connection process above again, or change your batteries.

P.S. The connection process is only meant for whichever part is not working (i.e. If the keyboard works, but the mouse doesn't, then only do it for the mouse.)