How do i insert symbols while texting ... I can text but cannt insert ?,=? + £

you are using the shift key when you type the punctuation.

Control+Insert also copies text.

It can be done, though this workaround doesn't function exactly the same as on an iOS device.

- In "System Preferences" find "Language & Text" and select "Text"

- Add a new rule where " " (double space) is replaced with ". " (period space).

-Enable "Symbol and Text Substitution"

-Check this new rule

• On the page that shows WHERE TO and VIEW MAP press TOOLS (the spanner symbol at the bottom right corner)
• Press SETTINGS (The spanner symbol) or LOCALE (The blue symbol) on models that don't have a settings icon
• Press LANGUAGE (the lips symbol)
• There are 3 items on this screen; VOICE, TEXT LANGUAGE and KEYBOARD
• To change the voice language to English press VOICE and select an English speaking voice
• To change the text language press TEXT LANGUAGE and select English, or American English if you're in the USA

If the text language is already in German you probably won't know which is voice, text and keyboard. The German word for German is Deutch so when you see this beside one of the items you'll know this is the one to change the text language. This should solve your problem.

for sending text messages :
1. call to your network operator customer care
2. request the message center number...
3.note it down
4. go to message settings>message center number
5. insert the number which is noted by you and save it
this solves your messaging problem ...
Good luck

There are two options. One is clicking the zero button twice. Next is go to insert symbols. There you will have symbol with enter buttons arrow symbol.You can use that symbol to go to new line.

try this... 1st Make Full Eprom Reset *2767*3855#
After Rebooting Mobile.
3. Type *7465625*638*00000000*00000000# then power OFF phone & Restart again
4. Type #7465625*638*00000000# (to permanently unlock the phone) then power OFF phone & restart again

It is either a software issue or you have the wrong keyboard installed on your laptop.

1. Go to the Windows Desktop, click on the "Start" button, and then click "Run" or "Start Search" if you are using the Windows Vista operating system. 2. Type the following text into the text box: 3. "devmgmt.msc" Click OK. 4. Select your computer when the Device Manager window opens, and then select "Action" from the options at the top of the window. 5. Choose the "Scan for hardware changes" option from the drop down menu that appears. 6. Insert any USB device such as a mouse or flash drive into the USB port in question. Now simply check the USB device to see whether it is working in order to test the port. Try resetting the device it?s usually a small pinhole on the back or side of the device try holding that in for about 10 seconds OR Try reflashing the firmware for your device you can find the latest firmware and flashing utilities from the manufacturers website. Make sure that you back your music up first because when you do this you are setting it back to factory settings.

Try reinstalling the software and see if that helps..