I keep getting the NTLDR is missing message when i try to boot up..why?

Try removing the battery from the phone and wait 10 seconds.

MBR stands for Master Boot Record. It is an essential piece of information written on the Hard Drive that allows the program to load. If the MBR is corrupted the computer boot process cannot proceed.
You have to repair it.
On old systems with a floppy drive you would get a Win98 boot disk on a floppy, boot the system using the A:drive (floppy) then use a DOS command to refresh the Master Boot Record.
If your system is using Windows XP tablet PC edition you might be able to use the installation disk to boot to the recovery console and use the command FIXBOOT or FIXMBR. You can also reinstall the Operating System.
I hope this answer gave you some starting point to investigate further. There are on the web some software vendors who sell system recuperation CDs. Some may be free other you have to buy.

To repair missing NTLDR orcorrupted system file/s, boot up with the Windows installation CD then - Press R to repair wheninstructed. Press 1 or Enter to repairthe C:\Windows folder. Then type chkdsk /r and then press Enter. The repair process willtake quite a long time.

this problem occurs when the files in the master boot record get corrupt due to the actions of the viruses or any malfunction
this problem can be solved by repairing the current OS by the OS cd if you are an expert you can edit the MBR probably the message show NTLDR missing ,right
or format the system will surely solve the problem
thanx PLZ vote

You have a corrupt boot sector. Use your system/restore disc to get back in and boot then run CHKDSK/F to check for and try and fix any errors.
Hope that helps.

your os is corrupt, reinstall your os again your problem will solve.

The command.com is a key file in the booting up process of computers. You either have a virus that destroyed it, or your hard disk drive is failing. Try going into the CMOS and make sure the CD is listed in the boot order and first, then boot to system CD.

this happened becoz u heve cancelled windos insatlltion in the middle . do one thing go to bios option by pressing f2 or del during boot up and then selct cd as primary boot device . also dont forget to selct the name of cd drive in cd drive option then try formatting the computer

Try booting up into safemode.

Reboot your pc.
Keep pressing F8 before you see the windows logo.
If you did it right, you should come to a screen where you can select Safemode.

If that doesn't work call Fujitsu support and ask for a recovery disk.

it is saying no kernel is found in the boot path,, this either means the boot path is damaged or the file is missing,,, place the restore disk in and recover your operating system,, or you can put an operating system disk in and try and repair the operating system