I am trying to hook my washer up to a laundry room valve, but it keeps leaking and giving a "NF" code... Is the valve faulty or does my washer need a new hose to hook up to a brand new home's valve?

NF(No Fill) code indicates that the washer is not getting enough water supply. Check if wwater supply is turned On and water is coming through the pipe. Then the fill valave can be clogged. t can become clogged with sediment over time
Stop the water supply and then remove the hose and then check for any clogs and if they are fine then in your case most probably your fill valve must have gone bad for this problem.Replacing it must solve the issue.

Jan 14, 2011 • Samsung WF337AA Front Load Washer

0helpful

2answers

I am getting error code...NF

Hi

Thanks for using FixYa. Error NF means No Fill. The washer has tried to fill but was unsuccessful. NF indicates No Flow. There is something that is interrupting the inbound flow of water to the washer, either hot or cold. Sometimes this happens when water service in the area is interrupted, creating an air pocket that causing the water valve not to sense water.

Try running the diagnostic test by—

Press the delicates and heavy soil keys together for 3 seconds.
You are in the service mode.
Now, press wrinkle free key, cold water should start entering.
Then, press the cotton sturdy and hot water should flow.
To exit the test mode, either unplug the machine or press the delicate and heavy soil again for 3 seconds.

Please do rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee

Sep 04, 2010 • Maytag Neptune FAV6800AW Top Load Washer

2helpful

2answers

Error code NF? what does that mean?

Hi

Thanks for using FixYa. Error NF means No Fill. The washer has tried to fill but was unsuccessful. NF indicates No Flow. There is something that is interrupting the inbound flow of water to the washer, either hot or cold. Sometimes this happens when water service in the area is interrupted, creating an air pocket that causing the water valve not to sense water.

Try running the diagnostic test by—

Press the delicates and heavy soil keys together for 3 seconds.
You are in the service mode.
Now, press wrinkle free key, cold water should start entering.
Then, press the cotton sturdy and hot water should flow.
To exit the test mode, either unplug the machine or press the delicate and heavy soil again for 3 seconds.

Please do rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee

Aug 28, 2010 • Maytag Neptune MAH5500B Front Load Washer

4helpful

1answer

My washer stops during the wash cycle and nf appears on the display screen

NF code is Washer does not turn on water valves to fill washer with water. You may need to replace your water valves, but I would first try removing your hot and cold water hoses to see if the screen on your valves is clogged. If they are corroded beyond repair, just pick up another set at the hardware store. Either that or you will need to do the valve replacement.

Mar 24, 2010 • Maytag Neptune MAH5500B Front Load Washer

7helpful

1answer

I keep getting a nf error message. what is this

water fill valve screens may be plugged filling too slow or valve may be bad or is one of the hoses turned off

Dec 31, 2009 • Samsung WF206ANS Front Load Washer

0helpful

1answer

Code nf shows on my washer

unplug for 15 mins and plug again to rest

Sep 14, 2009 • Whirlpool Calypso GVW9959K Top Load Washer

1helpful

1answer

Nf error cycle won't finish-maytag neptune TL

NF = No water fill. I haven’t had this failure to date but this how I would troubleshoot. Could be a block at the water valve inlet screens where the supply hoses connect to the machine. Check to see if the washer fill screens are blocked, It could be a failure of the Cold/Hot water solenoid valves. I would try to fill with hot water if no fill try cold only.
It might be easier to go into Service Mode to turn on and off the water valves while troubleshooting this issue. Enter Service Mode and use the keys assigned to the table at the bottom right side of page 16 of the FAV6800A/9800A Service Manual . Do this check only if you feel qualified, if still no water fill after the above checks I would break out my DVM and check for 120VAC at the water inlet valves. Post Back if you need additional help. Rich

Apr 21, 2009 • Maytag Neptune FAV6800AW Top Load Washer

Question 2

Anonymous

Master 1,891 Answers
Posted on Dec 07, 2009

Anonymous

Master

Joined: Nov 20, 2009

Answers

1891

Questions

0

Helped

409173

Points

5205

Try changing the washers in the hoses / don't use red outside hose washers/ but hi pressure for fill hoses . home depot should have them . and ck the valve screens at the washer side . clean screens good washers . ( water flow's and washer should work .. mm

Testimonial: "Thank You!"

Related Topics:

I am trying to hook my washer up to a laundry room valve, but it keeps leaking and giving a "NF" code... Is the valve faulty or does my washer need a new hose to hook up to a brand new home's valve?

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Fix my Samsung Washing Machine that gives an NF Code? It can work I use heavy duty/eco warm, otherwise it fails and throws an NF code.

When I start the washer it runs for a few minutes and then water comes out of the bottom of the washer and it is like a lake in my laundry room... then gives the code nf

I get the nf error code sometime but there water leaking into the washer from the inside at the top?

The code nf keeps coming up what does that stand for

I am getting error code...NF

Error code NF? what does that mean?

My washer stops during the wash cycle and nf appears on the display screen

I keep getting a nf error message. what is this

Code nf shows on my washer

Nf error cycle won't finish-maytag neptune TL

Not finding what you are looking for?

Neptune MAH5500B Front Load Washer

Fix my Samsung Washing Machine that gives an NF Code? It can work I use heavy duty/eco warm, otherwise it fails and throws an NF code.

Ask a Question

Top Maytag Washing Machines Experts

Ronny Bennett Sr.

Brad Brown

ZJ Limited

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

. Neptune MAH5500B Front Load Washer...

Related Topics:

I am trying to hook my washer up to a laundry room valve, but it keeps leaking and giving a "NF" code... Is the valve faulty or does my washer need a new hose to hook up to a brand new home's valve?

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Fix my Samsung Washing Machine that gives an NF Code? It can work I use heavy duty/eco warm, otherwise it fails and throws an NF code.

When I start the washer it runs for a few minutes and then water comes out of the bottom of the washer and it is like a lake in my laundry room... then gives the code nf

I get the nf error code sometime but there water leaking into the washer from the inside at the top?

The code nf keeps coming up what does that stand for

I am getting error code...NF

Error code NF? what does that mean?

My washer stops during the wash cycle and nf appears on the display screen

I keep getting a nf error message. what is this

Code nf shows on my washer

Nf error cycle won't finish-maytag neptune TL

Not finding what you are looking for?

Neptune MAH5500B Front Load Washer

Fix my Samsung Washing Machine that gives an NF Code? It can work I use heavy duty/eco warm, otherwise it fails and throws an NF code.

Related Topics

Ask a Question

Popular Questions

Maytag Neptune Error COde "nd"

My maytag neptune front load washer won't spin all the water out

Model FAV6800AWW will not pump water out if clothes are in machin

Fabric Softener Won't Dispense

HOW TO FIX NF CODE IN MAYTAG WASHING MACHINE

Top Maytag Washing Machines Experts

Ronny Bennett Sr.

Brad Brown

ZJ Limited

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

. Neptune MAH5500B Front Load Washer...