Question about Whirlpool LSR5132PQ Top Load Washer

1 Answer

My whirl pool washing machine tries to fill up but never fills up

My whirl pool washing machine tries to fill up with water. The water comes in both hot and cold but the tub never fills up. Just as soon as the water goes in it goes right back out the drain hose.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

This means it is stuck between the spin and rinse cycle and the time piece in the housing unit might need replaced if the knob itself isnt stripped also make sure it is on small or large load..

Posted on Dec 24, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

To fill tub with hot it makes humming noise only, turn to cold to fill tub cold water only


Hi,

If your washing machine will not fill, only hot or cold will fill or is slow to fill then read these tips. I have covered many of the things that can happen in these tips...


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101

Mar 31, 2011 | Washing Machines

1 Answer

Washing machine comes on but water not filling tub


Hi,

If your washing machine will not fill, only hot or cold will fill or is slow tofill then read these tips. I have covered many of the things that can happen inthese tips...


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101

Mar 23, 2011 | Maytag Washing Machines

1 Answer

No water in tub,water supply is conected but it doesn't fill the tub


Hi,

If your washing machine will not fill, only hot or cold will fill or is slow to fill then read these tips. I have covered many of the things that can happen in these tips...


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101

Mar 08, 2011 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Fills to wash, drains but then tub won't fill for rinse cycle;


u need a new cold water valve, if u check the temp of the water while its filling it is mainly hot, or u have the hot nd cold hoses on the wrong way , as all rinses r cold

Jan 31, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

THE TUB OF THE WASHER GETS REALLY LOW WHEN IS FILLED WITH WATER. NOW, ALSO THE WATER DOSENT COME IN WHEN I TURN IT ON


All top suspend tub washers drop down when they fill with water. And they rise again when they have pumped the water out. This is normal.
What is not normal is water not coming in.'

check following:
Water is turned on
Remove inlet hose and run water to see if it is blocked.
Clean the inlet filters.
If you hear a buzz but no water goes in the inlet valve needs replacing.
If yu use only cold water try swapping the cold hose onto the Hot inlet. Then select Warm Wash.
Then only turn on the Cold Tap.
This will allow you to fill the machine and do a wash.
Watch out though when it comes to the Rinse position......some machines only do a cold rinse, and because you have swapped the hose over to hot it will not fill to rinse the clothes. Until you can get a Tech to do the repair you can just use either a bucket to add cold water for the rinse or use the garden hose to fill the tub with cold water for the rinse.
Have yu got all that?

Oct 25, 2009 | Speed Queen AWS75NW Top Load Washer

3 Answers

I can't get the cold water to fill the tub/rinse. the hot works.


Your problem is either a clogged COLD fill valve or a bad water fill valve. Turn the water off. Remove the COLD hose from the WASHER. Check the filter screen inside the valve for sediment. If you find sediment,remove the screen and clean it. Replace the screen and turn the water back on. If you do not find sediment on the screen,replace the water valve.

Sep 21, 2009 | Frigidaire FWS1339A Top Load Washer

1 Answer

Hi there my hotpoint washing machinewma 54 fills up without the machine being on


Hello. your fill valve is faulty and needs to be replaced.

here is how the fill valve is supposed to work:
The fill valve--which is about the size of a coffee cup--is sometimes also called a "water inlet valve." It controls the entry of hot and cold water into the machine. The valve has three major components:


  • A hot-water solenoid

  • A cold-water solenoid

  • A mixing valve body

The inlet valve has three hoses connected to it, for :

  • The hot water from the house

  • The cold water from the house

  • The water directed into the washing machine's inner tub (either hot or cold, or both) to fill it with water

When electricity flows to one or both solenoids, water flows through the valve into the washing machine's inner tub. When the electricity stops, the water also stops.

Aug 21, 2009 | Washing Machines

1 Answer

Hot water stream when tub fills & how full tub gets super wash


there should be a knob connected to your water lines that come from the wall, turn the hot to the left.

Jun 22, 2009 | Estate Washing Machines

1 Answer

Cold water is slow when filling for rinse cycle


Turn off the cold water.
Remove the cold water hose from the machine.
Look inside the cold water inlet on the machine and clean the debris from the screen.
Problem solved.

Feb 22, 2009 | GE WJRR4170E Top Load Washer

Not finding what you are looking for?
Whirlpool LSR5132PQ Top Load Washer Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85219 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...