How do i put new firmware on my sony bdp s300 blu ray player? there is no usb or ethernet port on it?

Hello sir!
You need to make a disc to upgrade.. please follow the instructions on the main page.
http://goo.gl/Qjnl5

If the firmware update still doesn't work, ensure you have a USB key connected to your player. I have the BDP-S350 and Avatar wouldn't work until I connected a USB drive to it. Ensure it is formatted correctly-anything new should work fine.

jetman...

Go to the SONY website, download the latest firmware version for the player.
The SONY site gives you instructions on how to burn and flash the firmware update.

John

Put your BDP S300 on the garbage and buy a modern one and another brand!

Regards,

Alírio

Portugal

Go to web site below. www.blu-ray.com/firmware/firmware.php?id=23 - 4 hours ago

Try to update the firmware on the player by going to this website http://www.blu-ray.com/firmware/firmware.php?id=10 the newest version is 5.20 fixes alot of problems including playback issues with some BD movies and safe the file into a flash drive and plug it in on the back USB port, go to menu/firmware update run the update.

The Sony website for the BDP-S300 has a firmware upgrade for your Blu-Ray player that will allow your new Blu-Ray discs to load properly.

Does your player load the blu-ray menus?
Mine wouldn't until I updated it's firmware.
You can find the firmware upgrade for Sony BDP-S300 players here.

I hope that helps.

You need to go to Sony web site and down load a update or you can have them send it to you a disk.

Updating the firmware of your player can be a solution: it resolved this problem on my BDP-S300. How to do this and downloading the newest firmware see: US players: http://esupport.sony.com/US/perl/swu-list.pl?mdl=BDPS300 European players: http://support.sony-europe.com/hav/downloads/downloads.aspx?l=en&m=BDP-S300&f=FW_BDPS300