I own a front loading washer. Whenever its turned on it doesn't fill up the tub. The water doesn't turn on.
Hello Carl Kjonaas - Is the house valve(s) fully turn on? Typically when water is not filling completely, the washer could possibly have a faulty switch that does not allow the valve inside to turn or a kinked fill hose. Other possibilities of more potential serious issues are water valve faults, faulty control board, pressure switch or wiring failure. If I was in your position, I will personally consult a professional to move forward accurately and assist with the repairs.
Hello hitman43 - Are the house valves turn on fully? Most common cause is a faulty switch that doesn't allow the value inside turn or a kinked fill hose. Other possibilities can be water valve faults, faulty control board, pressure switch or wiring failure. Contact a professional to move forward accurately.
349 views
Usually answered in minutes!
first remove the hases from the washer check the screens at the warer valves to see if they are clogged then get a bucket and put the hoses in there and turn them on to see hoe strong the water is and let me know also is there power to the washer
×