At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I there i ahave recently bought the wep 200 and paired with my phone but cannot get it to answer automatic checked settings on my phone all ok is there reason for this thank you ian holmes
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
normally, the pairing has to be done once. If successfull, you can not pair the device a 2nd time withou removing it from the "paired devices" list in your phone. In order to get it recognized you should do the following. 1. check that BT is off on both devices 2. turn BT on on your mobile phone 3. power on your headset. In case, you have paired the headset successfully before, it has to be registered in your phone. It should then automatically find for the paired device (your phone in this case) and connect. Dont try to power on the headset before turning BT on on your mobile phone. If you have no success try to navigate to the bluetooth settings, check "paired devices" and make sure that your headset is deleted. Do the pairing and the 3 stepps above once again. Don forget, that the headsets also have to be charged..
Follow the steps to connect your WEP 301 bluetooth headset to phone.
1.When you turn on your Samsung Bluetooth headset for the first time, it proceeds into pairing mode immediately. 2. If you have paired the headset with other Bluetooth devices, make sure that the headset is off. Press and hold the Multi-Function button until the blue indicator light stays solid blue after blinking. 3. Set your Bluetooth phone to discover the headset by following your phone’s guide. Typically, the steps involve going to a ‘Setting’, ‘Connection’, or ‘Bluetooth’ menu on your phone and then selecting the option to discover Bluetooth devices. 4. Your phone will find the Samsung headset and ask if you want to pair with it. Confirm this by pressing the Yes or OK key. 5. Enter a passkey or PIN, 0000 (4 zeros), then press the Yes or OK key. 6. If pairing was successful, the indicator light will flash in blue 10 times rapidly before going to flashing every 3 seconds. If unsuccessful, the light remains on, and you will need to re-attempt pairing. 7. When you turn on your headset after pairing with the phone, the headset is automatically connected to the phone. 8. When you turn on your phone after pairing with the headset, the phone is connected to the headset by pressing the Multi-Function button.
Pairing Instructions Pairing will create a unique and encrypted wireless link between two Bluetooth enabled devices, such as your Bluetooth phone and Bluetooth headset.
Ensure that the headset is off (see Turning the headset on/off). Press and hold the Multi-Function button until the indicator light turns on in blue (approximately 8 seconds). Set your Bluetooth phone to discover the headset by following your phone's guide. Typically, the steps involve going to a Setup, Connect, or Bluetooth menu on your phone and then selecting the option to discover Bluetooth devices. Your phone will find the Samsung WEP210 headset and ask if you want to pair with it. Confirm this by pressing the Yes or OK key. Enter a passkey or PIN, 0000 (4 zeros), then press the Yes or OK key.
all you need to do hold doown the on button of the samsung wep 200 bluethooth for about 5 sec, till the headphone will enter searchmode, which the led light will be blinking continiously. note:- its possible for it to change color or it may be the same color
then immidiately you see that blinking continiously like that, turn on the bluethooth of your phone and search for audio device around or new pairing, then you will see the name of the samsung headset and now click the name on your nokia phone and it will ask you if you want to pair the device say yes and it will ask you for password its either 1234 or 0000 and thats all.
Your phone MUST have the bluetooth on and discoverable. When it is press and hold the power button on the WEP200 until the light turns on steady should be 5 to 10 seconds. With this done, use your blackberry to search for a new device, should be in the bluetooth menu. It should find the headset. Your phone will ask for a password enter "0000" (four zeros) then press pair or enter. It will take a few seconds to connect. Your phone will automatically connect to this headset when you power it on. Don't forget to turn the phone back to un-discoverable when done. I hope this helps.
first switch off the headset and then press and hold the multifunctional button for 10 sec then the blue light gets constant then u search frm the phone
the code is 0000
×