Maytag Range Model MGR5870 how to convert to propane

To convert this range to LP, you do not need to replace the orifices. The range comes with universal (double coaxial) orifices. You need to convert the pressure regulator; the procedure depends on the range. Then screw down the burner orifice hoods down to the pins. Do not over-tighten or you wil risk damaging the orifice. Then adjust the burner air shutter. For the oven burner, look behind the burner cover. It's shown on as part 25 on the oven/base diagram here: https://www.searspartsdirect.com/model-number/MGR5750BDQ/3048/0124002.html . You can find the range bake and broiler burners shown on the gas controls diagram.

The instructions for converting the Maytag MGR5750BDQ from natural gas to liquid propane (NG to LP) is shown in the installation instructions for the range, starting on page 10. Maytag has the documentation on their support page: . The current link to the manual is https://www.maytag.com/content/dam/global/documents/201103/installation-instructions-8101P404-60.pdf .

I hope this helps.

Cindy Wells

just install a new valve

Should only be a matter of changing the jets, see a gas fitter if they can be changed.

NEED TO CHANGE GAS ORIFICE. THEY ARE DIFF. BETWEEN NATURAL GAS AND PROPAIN THATS ALL YOU HAVE TO DO.

Hello,

This link http://www.appliance411.com/PDFdocs/16010161.pdf is for the service (not user) manual PAGE 55 covers how to convert gas.

Hi, here the link to your Installation Instructions:
http://shared.whirlpoolcorp.com/assets/pdfs/literature/Installation%20Instructions%20-%208101P624-60.pdf

It also states on page 8: "See Gas Conversion
Instructions located on the back of the range in the Assembly Kit."

Best of luck

you would have to find out from the manufacturers if there is a burner kit to convert from natural to propane... it usually involves replacing the gas jets...

Hello. Contact your propane provider and they will get you the conversion kit for your maytag model. In fact, they will send a technician to your home for free to make the conversion for you.
If you want to do it yourself go to any appliance store that handles maytag and get the conversion kit. Then remove the orifices that are currently in the stove and replace them. Regards, Joe
PS please rate my answer.

I have the same range but need to convert it from natural gas to propane....we should trade...9j antiques

I want