Intermitant transmitting I have had my WHP141 headphones for about a year now. Recently there has been a delay of 5 minutes or so from the time I unplug them from the charger until the green light goes on and it starts transmitting. Also at times the green light will go off and it will stop transmitting for 5-10 minutes and then start up again. Could this be a power supply problem? Doug
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are lots of different sized jack plug adapters on the market, you should be able to find one to do the job. I would try Amazon first, they have a good range and decent pictures of products.
BATTERY INSTALLATION AND INFORMATION Your wireless headphone unit requires two rechargeable AAA batteries. Rechargeable batteries are uncharged when you purchase them. Before you can use the wireless headphones, the batteries must be charged for 16 hours. Follow these steps to install and charge the batteries. Installing the Rechargeable Batteries Take care to follow these steps to correctly install the batteries. 1. On the right headphone, locate the battery compartment (1). Use the finger depression on the compartment to turn the battery compartment cover counterclockwise to remove the cover. 2. Insert two AAA rechargeable batteries, carefully following the markings inside to ensure the batteries are inserted properly, with the + and - ends in the correct positions. 3. Replace the battery compartment cover. Charging the Rechargeable Batteries To recharge the headset unit, follow the directions below. Note: The cradle/transmitter on the WHP141 is not a recharging cradle, although you may place the headset in the cradle during recharging. Follow these steps to recharge the NiMH rechargeable batteries. 1. Make sure the ON/OFF switch (2), located on the right headphone, is in the OFF position. 2. Connect the AC/DC main power adapter to the DC IN power supply socket (11), located on the back of the cradle/transmitter. 3. Plug the adapter into an electrical outlet. 4. Connect the charging cable (10), located on the back of the cradle/transmitter to the recharging input (3), located on the right headphone. The headphones can either be placed in the cradle/transmitter or placed next to the unit. If the headphones are connected correctly, the charging LED indicator light on the cradle/transmitter (8) illuminate.
×